Bedienungsanleitung Sony DVPCX860 (Seite 75 von 96) (Englisch)

30730

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Settings and Adjustments

x MPEG

Selects the MPEG audio signals to be output via the

DIGITAL OUT OPTICAL and COAXIAL connectors. You

cannot select this item when you set “DIGITAL OUT” to

“OFF.”

•

PCM: when the player is connected to an audio

component lacking a built-in MPEG decoder. If you

play MPEG audio sound tracks, the player outputs

stereo signals via the DIGITAL OUT OPTICAL and

COAXIAL connectors.

• MPEG: when the player is connected to an audio

component having a built-in MPEG decoder.

If the player is connected to an audio component

lacking a built-in MPEG decoder, do not set this.

Otherwise, when you play the MPEG audio sound

track, a loud noise or no sound will come out from the

speakers, affecting your ears or causing the speakers to

be damaged.

x DTS

Selects the DTS signals to be output via the DIGITAL OUT

OPTICAL and COAXIAL connectors. You cannot select

this item when you set “DIGITAL OUT” to “OFF.”

•

OFF: when the player is connected to an audio

component lacking a built-in DTS decoder.

• ON: when the player is connected to an audio

component having a built-in DTS decoder.

If the player is connected to an audio component

lacking a built-in DTS decoder, do not set this.

Otherwise, when you play the DTS sound track, a loud

noise or no sound will come out from the speakers,

affecting your ears or causing the speakers to be

damaged.

Setting the Digital Output Signal

Switches the methods of outputting audio signals when

you, connect 1. a digital component such as a receiver

(amplifier) having a digital connector, 2. an audio

component having a built-in decoder (Dolby Digital,

MPEG or DTS), 3. a DAT or MD via the DIGITAL OUT

OPTICAL or COAXIAL connector using an optical or

coaxial digital connecting cord. For connection details,

see pages 12 and 16.

When you select “ON,” set “DOLBY DIGITAL,” “MPEG”

and “DTS.”

x DOLBY DIGITAL

Selects the Dolby Digital signals to be output via the

DIGITAL OUT OPTICAL and COAXIAL connectors. You

cannot select this item when you set “DIGITAL OUT” to

“OFF.”

•

D-PCM (Downmix PCM): when you play Dolby Digital

sound tracks, the output audio signals are mixed down

to 2 channels. You can select whether the signals

conform to Dolby Surround (Pro Logic) or not by

making adjustments to the “DOWNMIX” item in

“AUDIO SETUP.”

• DOLBY DIGITAL: when the player is connected to an

audio component with a built-in Dolby Digital decoder.

If the player is connected to an audio component

lacking a built-in Dolby Digital decoder, do not set this.

Otherwise, when you play the Dolby Digital sound

track, a loud noise or no sound will come out from the

speakers, affecting your ears or causing the speakers to

be damaged.

Note

When you select “D-PCM,” set Virtual Enhanced Surround (VES)

to “OFF.” Otherwise, the player will not output signals from the

DIGITAL OUT OPTICAL or COAXIAL connector.

AUDIO SETUP

AUDIO ATT:

AUDIO DRC:

DOWNMIX:

DIGITAL OUT:

DOLBY DIGITAL:

MPEG:

To set, press , then .

To quit, press .

OFF

STANDARD

DOLBY SURROUND

D-PCM

PCM

DTS:

OFF

ENTER

DISPLAY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DVPCX860 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DVPCX860

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info