Bedienungsanleitung Sony DVPF25 (Seite 69 von 76) (Englisch)

30766

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Additional Information

Troubleshooting

If you experience any of the following

difficulties while using the player, use this

troubleshooting guide to help remedy the

problem before requesting repairs. Should

any problem persist, consult your nearest

Sony dealer.

Power

The power is not turned on.

, Check that the AC power cord is connected

securely.

Picture

There is no picture/picture noise appears.

, Re-connect the connecting cord securely.

, The connecting cord is damaged.

, Check the connection to your TV (page 18)

and switch the input selector on your TV so

that the signal from the player appears on

the TV screen.

, The disc is dirty or flawed.

, If the picture output from your player goes

through your VCR to get to your TV or if

your player is connected to a combination

TV/VIDEO player, the copy-protection

signal applied to some DVD programmes

could affect picture quality. If you still

experience problems even when you

connect your player directly to your TV,

please try connecting your player to your

TV’s S VIDEO input (page 18).

, (For Asian models only)

If the colour system of your player does not

match with that of your TV, change the

colour system of the player. For details, see

page 15. (You cannot change the colour

system of the DVD disc itself.)

, The picture on the screen becomes black

and white when you play a disc recorded in

a colour system that is different from your

TV.

Even though you set the aspect ratio in “TV

TYPE” of “SCREEN SETUP,” the picture

does not fill the screen.

, The aspect ratio of the disc is fixed on your

DVD.

Sound

There is no sound.

, Re-connect the connecting cord securely.

, The connecting cord is damaged.

, The player is connected to the wrong input

jack on the amplifier (receiver) (page 23,

24, 25).

, The amplifier (receiver) input is not

correctly set.

, The player is in pause mode or in Slow-

motion Play mode.

, The player is in fast forward or fast reverse

mode.

, If the audio signal does not come through

the DIGITAL OUT (OPTICAL) jack, check

the audio settings (page 67).

, While playing a Super VCD on which the

audio track 2 is not recorded, no sound will

come out when you select “2:STEREO,”

“2:1/L” or “2:2/R.”

Sound is noisy.

, When playing a CD with DTS sound tracks,

noise will come from the AUDIO OUT L/R

jacks or DIGITAL OUT (OPTICAL) jack

(page 31).

Sound distortion occurs.

, Set “AUDIO ATT” in “AUDIO SETUP” to

“ON” (page 66).

The sound volume is low.

, The sound volume is low on some DVDs.

The sound volume may improve if you set

“AUDIO DRC” to “TV MODE” (page 66).

, Set “AUDIO ATT” in “AUDIO SETUP” to

“OFF” (page 66).

Operation

The remote does not function.

, There are obstacles between the remote and

the player.

, The distance between the remote and the

player is too far.

, The remote is not pointed at the remote

sensor on the player.

c continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DVPF25 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DVPF25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info