Connections
49
Setting up the Player
(continued)
Audio Connection to Optional
Equipment
Connect the DVD player to your optional equipment
for audio output.
You must set the LINE IN/OUT switch to the
“OUT” mode to view pictures on your TV.
Set to “IN” only if you want to watch the TV’s pic-
ture on the player’s screen.
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic:
Connect the
AUDIO OUT jacks on the DVD player to the audio left
and right IN jacks on your amplifier, receiver, or stereo
system, using the audio cables.
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby Digital™, MPEG 2,
or DTS):
Connect DVD Player’s DIGITAL AUDIO OUT
jack to the corresponding IN jack on your amplifier. Use
an optional digital audio cable.
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel audio /
video receiver that supports one or more of the audio
formats supported by your DVD player such as MPEG
2, Dolby Digital, and DTS. Check the receiver manual
and the logos on the front of the receiver.
NOTES:
•
If the audio format of the digital output does not match the
capabilities of your receiver, the receiver produces a
strong, distorted sound or no sound at all.
• Six Channel Digital Surround Sound via a digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
•To see the audio format of the current DVD in the
on-screen display, press AUDIO.
