537520
36
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
36
Using Presentation Function via Network
After starting Projector Station for Network
Presentation, the connection setting window
appears.
1 Find projectors connected to the
network.
Click “Search” in the connection setting
window to search for projectors.
The appearance of the application on the
screen is subject to change without notice.
When a projector is connected to a network
via a wireless connection, if the “SSID” is
changed from the factory default, it may not
be found.
When a projector is connected to a network
via a wired connection, depending on the
network environment, it may not be found.
When connecting a projector with its
“SSID”, “Security Method” and “Wireless
Password” in the “Wireless LAN Setting”
changed, select “Manual Connect” and
connect manually.
2 Select a projector to project an image.
Check the checkbox.
3 Click “Connect”.
If other users are projecting an image,
the controller appears on the screen.
Click the to start projecting an
image (page 37).
If no users are projecting an image, the
controller appears on the screen and
starts projecting an image.
Display related settings (such as your
computer’s resolution) change when the
application is started.
Projecting an Image
Notes
Note
Connection Settings
Item Item descriptions
Wireless LAN
Adapter
To select a wireless LAN
adapter used for Projector
Station for Network
Presentation (appears only
when wireless connection is
used).
Connection
History
List profiles that have been
connected before.
Search Results Show the search result.
Profile Name Display the registered names
of the projectors found in the
network.
Connection Display the connection
method (wired/wireless).
Displays the strength of the
wireless signal (appears only
when wireless connection is
used).
SSID Display SSID (appears only
when wireless connection is
used).
IP Address Display IP address (appears
only when wired connection
is used).
Search Start searching for projectors
in the network.
Delete Delete selected profile.
Property Display the properties of the
selected profile.
Connect Connect to the selected
projector and start projecting
an image.
Manual
Connect
Enter the SSID and IP
address manually to connect
with the projector, and start
projecting an image.
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony EW226 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info