Bedienungsanleitung Sony FX35 (Seite 22 von 62) (Englisch)

543109

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

The Screen Menu

For adjusting the size, position, and aspect ratio of the projected image for each input signal.

*1: • Note that if the projector is used for profit or for public viewing, modifying the original picture

by switching to the aspect mode may constitute an infringement of the rights of authors or

producers, which are legally protected.

• Depending on the input signal, setting items for aspect ratio or some other setting items cannot

be set in some cases, or changing the aspect ratio setting may have no effect.

• A part of the image may be displayed in black, depending on the setting item.

*2: Available for VPL-FH36/FH35/FH31/FH30 only.

Setting items Description

Aspect

Changes the aspect ratio of the projected image. (page 24).

When the

computer

signal is

input

Full1: Displays the image to fit the maximum projected image size without

changing the aspect ratio of the input signal.

Full2: Displays the image to fit the maximum projected image size.

Normal: Displays the image on the center point of the projected image

without changing the resolution of the input signal or enlarging the image.

When the

video signal

is input

4:3: Displays the image to fit the maximum projected image size with an

aspect ratio fixed to 4:3.

16:9: Displays the image to fit the maximum projected image size with an

aspect ratio fixed to 16:9.

Full

: Displays the image to fit the maximum projected image size.

Zoom: Display the center point of the projected image to zoom.

V Center

*2 *3

Adjust the whole projected image by moving up and down on the screen.

As the selected number increases, the screen moves up, and as the selected

number decreases, the projected image moves down.

Vertical Size

*2 *3

Reduces or enlarges the image vertically.

The projected image is enlarged as the setting increases and reduced as the

setting decreases. If the subtitle of a movie, etc. cannot be seen, use this

together with “V Center.”

Over Scan

On/Off: Hides the outline of the image when set to “On.” Select “On” if

noise appears along the edge of the image.

Adjust Signal

Adjusts the image of a computer signal. Use this item if the edge of the

image is cut and reception is bad.

APA

*4 *5

Automatically adjusts the projected image to an optimum quality when you

press the ENTER key.

Phase

Adjusts the dot phase of the display pixel and the input signal. Set to the

value where looks clearest.

Pitch

The higher the setting, the wider the horizontal image elements (pitch). The

lower the setting, the narrower the horizontal image elements (pitch).

Shift

H: The higher the setting, the farther right the image is projected on the

screen. The lower the setting, the image farther left.

V: The higher the setting, the farther up the image is projected on the screen.

The lower the setting, the image farther down.

Notes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony FX35 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info