Bedienungsanleitung Sony GDM-F400 (Seite 14 von 84) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

51696

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Additional settings (OPTION)

You can manually degauss (demagnetize) the monitor, change the

menu position, set the power saving delay time, and lock the

controls.

Press the joystick.

The main MENU appears on the screen.

Move the joystick to highlight OPTION and press

the joystick again.

The OPTION menu appears on the screen.

Move the joystick to highlight the desired

adjustment item.

Adjust the selected item according to the following

instructions.

Degaussing the screen

The monitor is automatically demagnetized when the power is

turned on.

To manually degauss the monitor, first move the

joystick up or down to select (MANUAL DEGAUSS).

Then move the joystick to the right.

The screen is degaussed for about 3 seconds. If a second degauss

cycle is needed, allow a minimum interval of 20 minutes for the

best result.

Changing the menu’s position.

Change the menu’s position if it is blocking an image on the

screen.

To change the menu’s on-screen position, first move

the joystick up or down to select (OSD H POSITION)

for horizontal adjustment, or (OSD V POSITION) for

vertical adjustment. Then move the joystick to the left

or right to shift the on-screen menu.

Changing the power saving delay time.

To adjust the time it takes to enter the power saving

mode, first move the joystick up or down to select

(PWR SAVE DELAY). Then move the joystick to the left

or right to select the desired time.

If you select OFF, the monitor does not enter power saving mode.

See page 15 for more information about the monitor’s power

saving capabilities.

Locking the controls.

To protect adjustment data by locking the controls, first

move the joystick up or down to select (CONTROL

LOCK). Then move the joystick to the right to select

LOCK.

Only the 1 (power) switch, EXIT, and (CONTROL LOCK)

of the OPTION menu will operate. If any other items are

selected, the mark appears on the screen.

To cancel the control lock

Repeat the procedure above and set (CONTROL LOCK) to

UNLOCK.

Resetting the adjustments

This monitor has the following three reset methods. Use the

RESET button to reset the adjustments.

Resetting a single adjustment item

Use the joystick to select the adjustment item you want to reset,

and press the RESET button.

Resetting all of the adjustment data for the

current input signal

Press the RESET button when no menu is displayed on the screen.

Note that the following items are not reset by this method:

• on-screen menu language (page 8)

• on-screen menu position (page 14)

• power saving delay time (page 14)

• control lock (page 14)

Resetting all of the adjustment data for all input

signals

Press and hold the reset button for more than two seconds.

Note

The RESET button does not function when

(CONTROL LOCK)

is set to LOCK.

ZZ...

RESET

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony GDM-F400 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info