Bedienungsanleitung Sony HDR-CX560VE (Seite 116 von 128) (Englisch)

585576

116

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

116

Table of Contents Enjoy Useful Functions Index

Near windows or outdoors, where the LCD

screen, the viewfinder (HDR-CX690E/

CX700E/CX700VE) or the lens may be

exposed to direct sunlight. This damages

the inside of the viewfinder (HDR-CX690E/

CX700E/CX700VE) or LCD screen.

Operate your camcorder on DC 6.8 V/7.2 V

(battery pack) or DC 8.4 V (AC Adaptor).

For DC or AC operation, use the accessories

recommended in these operating instructions.

Do not let your camcorder get wet, for example,

from rain or sea water. If your camcorder

gets wet, it may malfunction. Sometimes this

malfunction cannot be repaired.

If any solid object or liquid gets inside the

casing, unplug your camcorder and have it

checked by a Sony dealer before operating it

any further.

Avoid rough handling, disassembling,

modifying, physical shock, or impact such

as hammering, dropping or stepping on the

product. Be particularly careful of the lens.

Keep the LCD screen closed when you are not

using your camcorder.

Do not wrap your camcorder with a towel, for

example, and operate it. Doing so might cause

heat to build up inside.

When disconnecting the power cord (mains

lead), pull it by the plug and not the cord.

Do not damage the power cord (mains lead)

such as by placing anything heavy on it.

Do not use a deformed or damaged battery

pack.

Keep metal contacts clean.

If the battery electrolytic liquid has leaked:

Consult your local authorized Sony service

facility.

Wash off any liquid that may have contacted

your skin.

If any liquid gets in your eyes, wash with

plenty of water and consult a doctor.







When not using your camcorder for a

long time

To keep your camcorder in optimum state for a

long time, turn it on and let it run by recording

and playing back images about once a month.

Use up the battery pack completely before

storing it.

Moisture condensation

If your camcorder is brought directly from a cold

place to a warm place, moisture may condense

inside your camcorder. This may cause a

malfunction to your camcorder.

If moisture condensation has occurred

Leave your camcorder for about 1 hour without

turning it on.

Note on moisture condensation

Moisture may condense when you bring your

camcorder from a cold place into a warm place

(or vice versa) or when you use your camcorder

in a humid place as follows:

You bring your camcorder from a ski slope

into a place warmed up by a heating device.

You bring your camcorder from an air

conditioned car or room into a hot place

outside.

You use your camcorder after a squall or a

shower.

You use your camcorder in a hot and humid

place.

How to prevent moisture condensation

When you bring your camcorder from a cold

place into a warm place, put your camcorder in

a plastic bag and seal it tightly. Remove the bag

when the air temperature inside the plastic bag

has reached the surrounding temperature (after

about 1 hour).







Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HDR-CX560VE Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony HDR-CX560VE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info