Bedienungsanleitung Sony HDR-FX1 (Seite 21 von 112) (Englisch)

62900

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Recording

To record from a low-angle

Use the REC START/STOP button on the

handle after releasing the HOLD lever.

To view the picture during recording, face the

LCD panel or the viewfinder upward, or face

the LCD screen down, then close and restore the

LCD panel to the original position with the LCD

screen facing out.

Indicators displayed during recording

The indicators will not be recorded on the tape.

Date/time and the camera settings data (p. 44)

will not be displayed during recording.

A Recording format ( or )

Recording mode (SP or LP) is also

displayed in the DV format.

B Remaining battery

The indicated time may not be correct,

depending on the environment where you

are using your camcorder. When you open

or close the LCD panel, it takes about

1 minute to display the correct remaining

battery time.

C Recording status ([STBY] (standby) or

[REC] (recording))

D Time code or tape counter (hour:

minute: second)

The time code of this camcorder utilizes the

drop-frame system.

E Recording capacity of the tape (p. 64)

F Microphone volume level (p. 36)

G Center marker (p. 55)

The center marker appears at the center of

the screen when [CENTER MARKR] on

the (CAMERA SET) menu is set to

[ON]. It helps composing pictures on the

screen.

H ND filter

If [ND1] or [ND2] flashes on the screen,

activate the ND filter (p. 30).

b Note

• Before changing the battery pack, set the POWER

switch to OFF (CHG).

• When the camcorder is left in recording standby for

more than about 5 minutes, your camcorder exits the

recording standby mode (the drum stops rotating) to

prevent tape wear and battery loss. Since the power

does not turn off, you can restart recording by

pressing REC START/STOP again. It takes some

time to restart recording, but this not a malfunction.

z Tip

• You can record the color bars on a tape. If you record

movies including the color bars, you can adjust the

color while observing the color bars when you are

viewing the pictures on a TV or monitor. To display

the color bars, press BARS. Press BARS again to

hide the color bars.

• To ensure smooth transition on a tape from the last

recorded scene to the next, note the following.

– Do not remove the cassette. (The picture will be

recorded continuously without a break even when

you turn the power off).

– Do not record pictures in the HDV format and the

DV format on the same tape.

– Do not record pictures in SP mode and LP mode on

the same tape.

– Avoid stopping then recording a movie in the LP

mode.

• The recording time, date, and the camera settings

data are recorded automatically on the tape without

being displayed on the screen. You can view this

information during playback by pressing DATA

CODE (p. 44).

HOLD lever

min

0:00:00

REC

HDV1080

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HDR-FX1 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony HDR-FX1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info