Bedienungsanleitung Sony HDR-SR12E (Seite 5 von 36) (Englisch)

119187

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

• Connect cables to the connectors of the

Handycam Station when using your camcorder

attached to the Handycam Station. Do not

connect the cables to both the Handycam

Station and your camcorder.

• Do not apply shock or vibration to your

camcorder. The internal hard disk of the

camcorder may not be recognized or recording/

playback may not be possible.

• Do not use your camcorder in very loud areas.

The hard disk of your camcorder may not be

recognized, or recording may not be possible.

• To protect the internal hard disk from shock by

dropping, the camcorder has drop sensor

function*. When a drop occurs, or under a non-

gravity condition, the block noise made when

this function is activated by the camcorder may

also be recorded. If the drop sensor catches a

drop repeatedly, recording/playback may be

stopped.

• When the temperature of the camcorder

becomes extremely high or extremely low, you

may not be able to record or play back on the

camcorder, due to the protection features of the

camcorder being activated in such situations. In

this case, a message appears on the LCD screen

or in the viewfinder (p. 29).

• Do not turn on the camcorder in a low-pressure

area, where the altitude is more than 3,000

meters (9,800 feet). Doing so may damage the

hard disk drive of your camcorder.

• If you repeat recording/deleting images for a

long time, fragmentation of data occurs on the

media. Images cannot be saved or recorded. In

such a case, save your images on some type of

external media first, and then perform [MEDIA

FORMAT]*.

• Fasten the grip belt and hold your camcorder

correctly while recording.

• To adjust the LCD panel, open the LCD panel

90 degrees to the camcorder (1), then rotate it

to the best angle to record or play (2). You can

rotate the LCD panel 180 degrees to the lens

side (2) to record in mirror mode.

• The viewfinder and the LCD screen are

manufactured using extremely high-precision

technology, so over 99.99% of the pixels are

operational for effective use. However, there

may be some tiny black points and/or bright

points (white, red, blue, or green in color) that

appear constantly on the LCD screen. These

points are normal results of the manufacturing

process and do not affect the recording in any

way.

• Remove the insulation sheet before using the

Remote Commander.

Types of “Memory Stick” you can use

with your camcorder

• For recording movies, it is recommended that

you use a “Memory Stick PRO Duo” of 1 GB or

larger marked with:

– (“Memory Stick

PRO Duo”)*

– (“Memory Stick

PRO-HG Duo”)

• A “Memory Stick PRO Duo” of up to 8 GB has

been confirmed to operate correctly with this

camcorder.

* Marked with Mark2 or not, either can be

used.

190 degrees to the

camcorder

2180 degrees (max.)

290 degrees

(max.)

Insulation sheet

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HDR-SR12E Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony HDR-SR12E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info