Bedienungsanleitung Sony hdr-sr5 (Seite 84 von 118) (Englisch)

291332

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Troubleshooting

If you run into any problems using your

camcorder, use the following table to

troubleshoot the problem. If the problem

persists, disconnect the power source and

contact your Sony dealer.

• Overall operations/Easy Handycam

operation/Remote Commander .............84

• Batteries/Power sources ........................85

• Viewfinder (HDR-SR7E/SR8E)/LCD

screen.....................................................86

• “Memory Stick Duo” ............................86

• Recording ..............................................87

• Playing back images on your

camcorder ............................................89

• Editing images on your camcorder........89

• Viewing on the TV ................................90

• Dubbing/Connecting to other

devices...................................................90

• Functions that cannot be used

simultaneously.......................................90

Notes before sending your camcorder

for repair

• Your camcorder may be required to

initialize or change the current hard disk

of the camcorder, depending on the

problem. In the event of this, the data

stored on the hard disk will be deleted. Be

sure to save the data on the internal hard

disk (p. 45) onto other media (backup)

before sending your camcorder for repair.

We will not compensate you for any loss

of hard disk data.

• During repair, we may check a minimum

amount of data stored on the hard disk in

order to investigate the problem.

However, your Sony dealer will neither

copy nor retain your data.

The power does not turn on.

• Attach a charged battery pack to the

camcorder (p. 16).

• The plug of the AC Adaptor has been

disconnected from the wall socket. Connect

it to the wall socket (p. 16).

• Set the camcorder onto the Handycam

Station securely (p. 16).

The camcorder does not operate

even when the power is set to on.

• It takes a few seconds for your camcorder

to be ready to shoot after the power is

turned on. This is not a malfunction.

• Disconnect the AC Adaptor from the wall

socket or remove the battery pack, then

reconnect it after about 1 minute. If the

functions still do not work, press the

RESET button (p. 109) using a pointed

object (If you press the RESET button, all

settings, including the clock setting, are

reset).

• The temperature of your camcorder is

extremely high. Turn off your camcorder

and leave it for a while in a cool place.

• The temperature of your camcorder is

extremely low. Leave your camcorder with

the power of your camcorder on. Turn off

your camcorder and take it to a warm place.

Leave the camcorder there for a while, then

turn on your camcorder.

Buttons do not work.

• During Easy Handycam operation, the

following buttons/functions are not

available.

– BACK LIGHT button (p. 32)

– CAM CTRL dial (HDR-SR7E/SR8E)

(p. 33)

– Playback zoom (p. 37)

– To turn on and off the LCD backlight

(Pressing and holding the DISP/BATT

INFO button for a few seconds) (p. 21)

Overall operations/Easy

Handycam operation/Remote

Commander

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony hdr-sr5 Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony hdr-sr5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info