Bedienungsanleitung Sony hdr xr100e (Seite 5 von 64) (Englisch)

292220

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

received, including interference that may

cause undesired operation.

Supplied items

The numbers in ( ) are the supplied

quantity.

 AC Adaptor (1)

 Power cord (Mains lead) (1)

 Component A/V cable (1) 

 A/V connecting cable (1) 

 USB cable (1) 

 Wireless Remote Commander (1)

(only for HDR-XR200E/XR200VE)

A button-type lithium battery is already

installed. Remove the insulation sheet before

using the Wireless Remote Commander.

Insulation sheet

 Rechargeable battery pack NP-FH60 (1)

 CD-ROM “Handycam Application

Software” (1)

“PMB” (software, including “PMB Guide”)

“Handycam Handbook” (PDF)

 “Operating Guide” (This manual) (1)

See page 41 for the “Memory Stick” media you

can use with this camcorder.

Notes on use

Using the camcorder

The camcorder is not dustproofed, dripproofed

or waterproofed. See “Precautions” (p. 51).







Do not do any of the following when the

(Movie)/ (Photo) mode lamps (p. 12) or the

ACCESS lamps (p. 10), the access lamp (p. 41)

are lit or flashing. Otherwise, the recording

media may be damaged, recorded images may

be lost or other malfunctions could occur.

ejecting the “Memory Stick PRO Duo” media

removing the battery pack or AC Adaptor

from the camcorder

Do not apply shock or vibration to the

camcorder. The camcorder may not be able to

record or play movies and photos.

Do not use the camcorder in very loud areas.

The camcorder may not be able to record or

play movies and photos.

When connecting the camcorder to another

device with communication cables, be sure to

insert the connector plug in the correct way.

Pushing the plug forcibly into the terminal

will damage the terminal and may result in a

malfunction of the camcorder.

Do not close the LCD screen when the

camcorder is connected to another device with

the USB cable. Your recorded images may be

lost.

Even if the camcorder is turned off, the GPS

function is working as long as the GPS switch

is set to ON. Make sure that the GPS switch is

set to OFF during take off and landing of an

airplane (HDR-XR200VE).

To protect the internal hard disk from shock

by dropping, the camcorder has drop sensor

function. When a drop occurs, or under a non-

gravity condition, the block noise made when

this function is activated by the camcorder may

also be recorded. If the drop sensor catches a

drop repeatedly, recording/playback may be

stopped.

When the temperature of the camcorder

becomes extremely high or extremely low, you

may not be able to record or play back on the

camcorder, due to the protection features of the

camcorder being activated in such situations. In

this case, a message appears on the LCD screen

(p. 50).







Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony hdr xr100e Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony hdr xr100e

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info