Bedienungsanleitung Sony HDR-XR520E (Seite 31 von 136) (Englisch)

514530

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Table of Contents Useful Recording Techniques Index

It will take several seconds until you can start recording after you turn on the camcorder. You cannot

operate your camcorder during this time.

If you close the LCD screen while recording movies, the camcorder stops recording.

If the ACCESS/access lamp is lit or flashing after recording is finished, it means that data is still being

written onto the recording media. Do not apply shock or vibration to your camcorder, and do not remove

the battery or AC Adaptor.

You can check the recordable time and the remaining capacity, etc., by touching

(HOME) 

(MANAGE MEDIA)  [MED

IA INFO] (p. 72).

To adjust the angle of the LCD panel, first open the LCD panel 90 degrees to the camcorder (), and

then adjust the angle (). If you rotate the LCD panel 180 degrees to the lens side (), you can record

movies/photos in mirror mode.

When you make recording with the viewfinder only, pull out the viewfinder (), close the LCD panel,

and adjust the angle to your comfortable position(). If the indicators on the viewfinder appear blurred,

adjust the focus with the viewfinder lens adjustment lever located beneath the viewfinder.

When you open or close the LCD screen, or adjust the angle, be careful not to press the buttons on the

side of the LCD screen by mistake.

Tips

ou can record photos during movie recording by pressing PHOTO ([Dual Rec], p. 35).

When a face is detected, a white frame appears and the image quality around the face is optimized

utomatically ([FACE DET. SETTING], p. 86).

In the default setting, a photo is recorded automatically when the camcorder detects the smile of a person

uring movie recording ([SMILE SHUTTER], p. 87). An orange frame appears around a face targeted for

possible smile detection shot.

ou can capture photos from recorded movies (p. 60).

You can switch the shooting mode by touching

(HOME)  (CAMERA)  [MOVIE].

The LCD screen of your camcorder can display recording images across the entire screen (full pixel

display). However, this may cause slight trimming of the top, bottom, right and left edges of images when

played back on a TV which is not compatible with full pixel display. In this case, set [GUIDEFRAME] to

N] (p. 78), and record images using the outer frame displayed on the screen as a guide.

Data code during recording

The recording date, time and condition, and coordinates (HDR-XR500VE/XR520VE) are

recorded automatically on the recording media. They are not displayed during recording.

owever, you can check them as [DATA CODE] during playback (p. 88).







 90 degrees (max.)

 180 degrees (max.)

 90 degrees to the camcorder

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HDR-XR520E Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony HDR-XR520E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info