Bedienungsanleitung Sony hdrux20 (Seite 130 von 148) (Englisch)

291432

130

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

130

Precautions and maintenance (Continued)

• Do not damage the power cord (mains lead)

such as by placing anything heavy on it.

• Keep metal contacts clean.

• Keep the Remote Commander and button-type

battery out of children’s reach. If the battery is

accidentally swallowed, consult a doctor

immediately.

• If the battery electrolytic liquid has leaked:

– consult your local authorized Sony service

facility.

– wash off any liquid that may have contacted

your skin.

– if any liquid gets in your eyes, wash with

plenty of water and consult a doctor.

x When not using your camcorder for a

long time

• Periodically turn it on and let it run such as by

playing back or recording images for about 3

minutes.

• Remove a disc from your camcorder.

• Use up the battery pack completely before

storing it.

Moisture condensation

If your camcorder is brought directly from a

cold place to a warm place, moisture may

condense inside your camcorder, on the

surface of the disc, or on the pickup lens.

This may cause a malfunction to your

camcorder.

x If moisture condensation has occurred

Leave your camcorder for about 1 hour

without turning it on.

x Note on moisture condensation

Moisture may condense when you bring

your camcorder from a cold place into a

warm place (or vice versa) or when you use

your camcorder in a humid place as

follows:

• You bring your camcorder from a ski slope into

a place warmed up by a heating device.

• You bring your camcorder from an air

conditioned car or room into a hot place outside.

• You use your camcorder after a squall or a

shower.

• You use your camcorder in a hot and humid

place.

x How to prevent moisture condensation

When you bring your camcorder from a

cold place into a warm place, put your

camcorder in a plastic bag and seal it

tightly. Remove the bag when the air

temperature inside the plastic bag has

reached the surrounding temperature (after

about 1 hour).

LCD screen

• Do not exert excessive pressure on the LCD

screen, as it may cause damage.

• If your camcorder is used in a cold place, a

residual image may appear on the LCD screen.

This is not a malfunction.

• While using your camcorder, the back of the

LCD screen may heat up. This is not a

malfunction.

x To clean the LCD screen

If fingerprints or dust make the LCD screen

dirty, it is recommended you use a soft

cloth to clean it. When you use the LCD

Cleaning Kit (optional), do not apply the

cleaning liquid directly to the LCD screen.

Use cleaning paper moistened with the

liquid.

x On adjustment of the touch panel

(CALIBRATION)

The buttons on the touch panel may not

work correctly. If this happens, follow the

procedure below. It is recommended that

you connect your camcorder to the wall

outlet (wall socket) using the supplied AC

Adaptor during the operation.

1 Turn on your camcorder.

2 Touch (HOME) t (SETTINGS)

t [GENERAL SET] t

[CALIBRATION].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony hdrux20 Seite 130

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony hdrux20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info