Bedienungsanleitung Sony HT-9900M (Seite 20 von 60) (Englisch)

36150

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

masterpage:Left

lename[E:\SEM_Janet\Revision_HT-

950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm]

Model name [HT-5950DP/HT-6900DP/HT-9900M/HT-9950M]

[2-549-736-12(1)]

x XXXXXXX

(Sub woofer phase polarity)

(HT-9950M, HT-9900M and HT-6900DP

only)

Lets you set the sub woofer phase polarity.

• NORMAL

Normally, select “NORMAL”.

• REVERSE

Depending on the type of front speakers, the position

of the sub woofer, and the cut-off frequency of the

sub woofer, setting the phase polarity to

“REVERSE” may produce better bass. Besides bass

reproduction, the richness and tightness of the

overall sound may also be affected. While listening

from the main listening position, select the setting

that best suits your environment.

x XXXX/XX

(Surround speaker position)

Lets you specify the location of your surround speakers

for proper implementation of the surround effects in

the Cinema Studio EX modes (page 31).

• SIDE/LO

Select if the location of your surround speakers

corresponds to section A and C.

•SIDE/HI

Select if the location of your surround speakers

corresponds to section A and D.

• BEHD/LO

Select if the location of your surround speakers

corresponds to section B and C.

• BEHD/HI

Select if the location of your surround speakers

corresponds to section B and D.

Tip

Surround speaker position is designed specifically for

implementation of the Cinema Studio EX modes.

For other sound fields, speaker position is not so

critical. Those sound fields were designed under the

premise that the surround speakers would be located

behind the listening position, but presentation remains

fairly consistent even with the surround speakers

positioned at a rather wide angle. However, if the

speakers are pointing toward the listener from the

immediate left and right of the listening position, the

surround effects becomes unclear unless set to

“SIDE/LO” or “SIDE/HI”.

Nevertheless, each listening environment has many

variables, such as wall reflections, and you may obtain

better results using “BEHD/HI” if your speakers are

located high above the listening position, even if they

are to the immediate left and right.

Therefore, although it may result in a setting contrary

to the above explanation, we recommend that you

playback multi channel surround encoded software and

select the setting that provides a good sense of

spaciousness and that best succeeds in forming a

cohesive space between the surround sound from the

surround speakers and the sound of the front speakers.

If you are not sure which sounds best, select

“BEHD/LO” or “BEHD/HI” and then use the speaker

distance parameter and speaker level adjustments to

obtain proper balance.

100˚

120˚

US01COV_HT-5950DP-CA.book Page 20 Monday, April 11, 2005 11:37 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HT-9900M Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info