Bedienungsanleitung Sony HT-9950M (Seite 27 von 60) (Englisch)

36148

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Amplifier Operation

masterpage:Right

lename[E:\SEM_Janet\Revision_HT-

950DP\J9050000_25497361215950DPUS\2549736121\US04BSC_HT-5950DP-CA.fm]

Model name [HT-5950DP/HT-6900DP/HT-9900M/HT-9950M]

[2--549-736-12(1)]

A SW: Lights up when the audio signal is output

from the SUB WOOFER jack.

B LFE: Lights up when the disc being played

back contains the LFE (Low Frequency

Effect) channel and the LFE channel signal is

actually being reproduced.

C SP A/SP B*: Lights up in accordance with

the speaker system being used (A or B). Turns

off when speaker output is turned off or when

headphones are connected.

* For HT-5950DP, “SP” lights up in the display.

D ; DIGITAL EX: “; DIGITAL” lights up

when the receiver is decoding signals recorded

in the Dolby Digital format.

“; DIGITAL EX” lights up when the

receiver is decoding signals recorded in the

Dolby Digital EX format.

Note

When playing a Dolby Digital format disc, be

sure that you have made digital connections and

that INPUT MODE is not set to “ANALOG”

(page 35).

E ; PRO LOGIC IIx: “; PRO LOGIC”

lights up when the receiver applies Pro Logic

processing to 2 channel signals in order to

output the center and surround channel

signals. “; PRO LOGIC II” lights up when

the Pro Logic II Movie/Music/Game decoder

is activated. “; PRO LOGIC IIx” lights up

when the Pro Logic IIx Movie/Music/Game

decoder is activated.

Note

Dolby Pro Logic IIx decoding does not function

for DTS signals or for signals with a sampling

frequency of more than 48 kHz.

F DTS-ES 96/24: “DTS” lights up when DTS

signals are input. “DTS-ES” lights up when

DTS-ES signals are input. “DTS 96/24” lights

up when the receiver is decoding DTS 96 kHz/

24 bit signals.

Note

When playing a DTS format disc, be sure that you

have made digital connections and that INPUT

MODE is not set to “ANALOG” (page 35).

G NEO:6: Lights up when DTS Neo:6 Cinema/

Music mode decoding is activated.

H Tuner indicators: Lights up when using the

receiver to tune in radio stations, etc. See

pages 24–26 for tuner operations.

I D.RANGE: Lights up when dynamic range

compression is activated (page 36).

J COAX: Lights up when the source signal is a

digital signal being input through the

COAXIAL terminal or when INPUT MODE

is set to “COAX IN”

(page 35).

K OPT: Lights up when the source signal is a

digital signal being input through the

OPTICAL terminal or when INPUT MODE is

set to “OPT IN”

(page 35).

L SLEEP: Lights up when sleep timer is

activated.

About the indications in the display

L C R

SSR

LFE

SP A

DIGITAL EX

PRO LOGIC IIx

DTS-ES NEO:6

D.RANGE

SLEEP OPT COAX

96/24

SP B

;;

MEMORY

STEREO MONO

9 8

q;qa

2143* 567

continued

US01COV_HT-5950DP-CA.book Page 27 Monday, April 11, 2005 11:37 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HT-9950M Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info