Bedienungsanleitung Sony HT-AF5 (Seite 73 von 80) (Englisch)

534111

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Additional Information

No sound is output from the system

and TV speaker while using the System

Audio Control function.

• Make sure the TV is compatible with the

System Audio Control function.

• If you cannot listen to the sound of a

component connected to the system

– Select the appropriate input when you

want to watch a program on a

component connected via HDMI

connection to the system.

– Change the TV channel when you want

to watch a TV broadcast.

– Select the component or input you want

to watch when you watch a program on

the component connected to the TV.

Refer to the operating instructions of the

TV on this operation.

When the system is in standby mode,

there is no image or sound on the TV.

• When the system is in standby mode,

image and sound are output from the

HDMI component selected the last time

you turned off the system. If you are

enjoying other component, play the

component and perform the One-Touch

Play operation, or turn on the system to

select the HDMI component you want to

enjoy.

• Make sure “PASS THRU” is set to “THRU

ON” in the SET HDMI menu if you

connect components not compatible with

the “BRAVIA” Sync to the system (page

46).

The volume turns down when the

output method changes from the TV

speaker to the system’s speakers.

• The Volume Limit function is working

(page 44).

S-AIR function

S-AIR connection is not established

(sound transmission is not

established), e.g., the indicator of the

S-AIR sub unit turns off, flashes, or

turns red.

• If you use another S-AIR main unit, place

it more than 8 m away from this S-AIR

main unit.

• Confirm the ID of the S-AIR main unit and

S-AIR sub unit are the same (page 52).

• Another S-AIR sub unit is paired to the

S-AIR main unit. Pair the desired S-AIR

sub unit with the S-AIR main unit

(page 53).

• Place the S-AIR main unit and S-AIR sub

unit separately from other wireless

devices.

• Avoid using any other wireless devices.

• The S-AIR sub unit is turned off. Make

sure the AC power cord (mains lead) is

connected and turn on the S-AIR sub unit.

No sound is heard from the S-AIR

product.

• If you use another S-AIR main unit, place

it more than 8 m away from this S-AIR

main unit.

• Confirm the ID of the S-AIR main unit and

S-AIR sub unit are the same (page 52).

• Confirm the pairing setting (page 53).

• Place the S-AIR main unit and S-AIR sub

unit closer to each other.

• If you are using any equipment that

generates electromagnetic energy such as

a microwave oven near an S-AIR

products, turn off the equipment and try

using the S-AIR product again after

waiting for a short time.

• Place the S-AIR main unit and S-AIR sub

unit separately from other wireless

devices.

• Avoid using any other wireless devices.

• Change the “RF CHANGE” setting

(page 58).

• Change the ID settings of the S-AIR main

unit and S-AIR sub unit.

continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HT-AF5 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony HT-AF5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info