Bedienungsanleitung Sony HT-RT40 (Seite 25 von 36) (Englisch)

699402

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Additional Information

 If the sound was output from the

speakers of the TV the previous

time, the system does not turn on

even when the TV is turned on.

Turn on the system and switch the

input of the system to “TV”

(page 12).

The system turns off when the TV is

turned off.

 Check the setting of “HDMI>” –

“TVSTB” (page 19). When “TVSTB” is

set to “ON”, the system turns off

automatically when you turn off the

TV regardless of the input.

The system does not turn off even

when the TV is turned off.

 Check the setting of “HDMI>” –

“TVSTB” (page 19). To turn off the

system automatically regardless of

the input when you turn off the TV,

set “TVSTB” to “ON”. The TV must

support the Control for HDMI

function (page 21). For details, refer

to the operating instructions of your

TV.

No TV sound is output from the system.

 Check the type and connection of

the HDMI cable, optical digital

cable, or analog audio cable that is

connected to the system and the TV

(refer to the supplied Startup

Guide).

 When the system is connected with

a TV compatible with Audio Return

Channel, make sure the system is

connected to an HDMI (ARC) jack of

a TV (refer to the supplied Startup

Guide). If sound is still not output or

if sound is interrupted, connect the

optical digital cable (supplied only

for certain areas) and set “AUD >” –

“TV AU” to “OPT” (page 19).

 If your TV is not compatible with

Audio Return Channel, TV sound will

not be output from the system even

if the system is connected to the

TV’s HDMI input jack. To output TV

sound from the system, connect the

optical digital cable (supplied only

for certain areas) (refer to the

supplied Startup Guide).

 If sound is not output from the

system even if the system and TV

are connected by optical digital

cable or if the TV does not have an

optical digital sound output jack,

connect an analog audio cable (not

supplied) and switch input of the

system to “ANALOG” (page 12).

 Switch input of the system to “TV”

(page 12).

 Increase the volume on the system

or cancel muting.

 Depending on the order in which

you connect the TV and the system,

the system may be muted and

“MUTING” is displayed in the front

panel display of the system. If this

happens, turn on the TV first, then

the system.

 Set the speakers setting of the TV

(BRAVIA) to Audio System. Refer to

the operating instructions of your

TV on how to set the TV.

 Depending on the TV and the

playback sources, sound may not

be output from the system. Set the

audio format setting of the TV to

“PCM”. For details, refer to the

operating instructions of your TV.

The sound is output from both the

system and the TV.

 Mute the sound of the system or the

TV.

Sound

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HT-RT40 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony HT-RT40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info