Bedienungsanleitung Sony HT-SF200 (Seite 30 von 40) (Englisch)

675637

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

of the TV and the system from the AC

outlets (mains), then connect them

again.

 When the system and TV are

connected with an HDMI cable, check

the following.

– The HDMI jack of the connected TV

is labeled with “ARC.”

– The Control for HDMI function of the

TV is set to on.

– On the system, the Control for HDMI

function is set to on (page 26).



If your TV is not compatible with Audio

Return Channel, connect the optical

digital cable (supplied) (refer to the

supplied Startup Guide). If the TV is

not compatible with Audio Return

Channel, TV sound will not be output

from the system even if the system is

connected to the TV’s HDMI IN jack.

 If the sound of the device that is

connected to the optical input jack of

the TV is not output, try the following.

– Connect the cable box or satellite

box directly to the TV IN (OPTICAL)

jack of the system.

 Press INPUT repeatedly to select the

TV input (page 18).

 Increase the volume on the TV or

cancel muting.

 Depending on the order in which you

connect the TV and the system, the

system may be muted. If this

happens, turn on the TV first, then the

system.

 Set the speakers setting of the TV

(BRAVIA) to Audio System. Refer to

the operating instructions of your TV

regarding how to set the TV.

 Check the sound output of the TV.

Refer to the operating instructions of

the TV for the TV settings.

 The system supports the Dolby Digital

and PCM audio formats (page 35).

When you playback an unsupported

format, set the digital audio out

setting of the TV (BRAVIA) to “PCM.”

For details, refer to the operating

instructions of your TV.

The sound is output from both the

system and the TV.

 Mute the sound of the system or the

TV.

No sound or only a very low-level

sound of the device connected to

the system is heard from the

system.

 Press  + and check the volume

level (page 11).

 Press

 or  + to cancel the muting

function (page 11).

 Make sure the input source is

selected correctly. You should try

other input sources by pressing

INPUT repeatedly (page 18).

 Check that all the cables and cords of

the system and the connected device

are firmly inserted.

 If the connected device supports up-

sampling feature, you need to turn it

off.

The surround effect cannot be

obtained.

 Depending on the input signal and

the sound mode setting, surround

sound processing may not work

effectively. The surround effect may

be subtle, depending on the program

or disc.

 To play multi channel audio, check

the digital audio output setting on

the device connected to the system.

For details, refer to the operating

instructions supplied with the

connected device.

No sound or only very low-level

sound is heard from the subwoofer.

 Press BASS repeatedly to adjust the

level of the bass tone (page 22).

 If the input sources contain very little

bass sound components (i.e., a TV

broadcast), the sound from the

Subwoofer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HT-SF200 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony HT-SF200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info