Bedienungsanleitung Sony HT-ZF9 - Soundbar (Seite 73 von 100) (Englisch)

675569

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

– Make sure the AC power cord

(mains lead) of the subwoofer is

connected properly.

–Press  (power) of the subwoofer

to turn on the power.

 If the power indicator on the

subwoofer flashes slowly in green or

lights in red, try the following.

– Move the subwoofer to a location

near the main unit so that the power

indicator on the subwoofer lights in

green.

– Follow the steps in “Connecting the

Subwoofer and Rear Speakers

Wirelessly” (page 32).

– Check the wireless connection

status (page 63).

 If the power indicator on the

subwoofer flashes in red, press 

(power) of the subwoofer to turn off

the power and check whether the

ventilation holes of the subwoofer is

blocked or not.

 If the input sources contain very little

bass sound components (i.e., a TV

broadcast), the sound from the

subwoofer may be difficult to hear.

You can check the subwoofer sound

by emitting the test tone (page 59).

 Set the night mode to off. For details,

see “Enjoying Clear Sound with Low

Volume at Midnight (NIGHT)”

(page 50).

 If you change the [RF Channel] setting

from [Off] to [On] (page 34), it may

take 1 minute for the sound to be

output.

Sound skips or has noise.

 If there is a device nearby that

generates electromagnetic waves,

such as a wireless LAN or a

microwave oven in use, locate the

system apart from it.

 If there is an obstacle between the

main unit and the subwoofer, move

or remove it.

 Locate the main unit and the

subwoofer as close as possible.

 Change the [RF Channel] setting

(page 34).

 Switch the network connection of the

TV or Blu-ray Disc player from

wireless to wired.

No sound is heard from the rear

speakers.

 Make sure the AC power cord (mains

lead) of the rear speaker is connected

properly.

 If the power indicator on the rear

speaker does not light, try the

following.

– Make sure the AC power cord

(mains lead) of the rear speaker is

connected properly.

– Press  (power) of the rear speaker

to turn on the power.

 If the power indicator on the rear

speaker flashes slowly in green or

lights in red, try the following.

– Move the rear speaker to a location

near the main unit so that the power

indicator on the rear speaker lights

in green.

– Follow the steps in “Connecting the

Subwoofer and Rear Speakers

Wirelessly” (page 32).

– Check the wireless connection

status (page 63).

 Press REAR  + on the remote

control to increase the rear speakers

volume (page 51).

 If you change the [RF Channel] setting

from [Off] to [On] (page 34), it may

take 1 minute for the sound to be

output.

Sound skips or has noise.

 If there is a device nearby that

generates electromagnetic waves,

such as a wireless LAN or a

microwave oven in use, locate the

system apart from it.

Rear Speakers (not supplied)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HT-ZF9 - Soundbar Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony HT-ZF9 - Soundbar

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info