Bedienungsanleitung Sony HT-ZF9 - Soundbar (Seite 77 von 100) (Englisch)

675569

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

 Replace both batteries in the remote

control with new ones, if they are

weak.

 Make sure you are pressing the

correct button on the remote control.

TV remote control does not work.

 This problem might be solved by

enabling the IR repeater function

(page 34).

The Control for HDMI function does

not work properly.

 Check the connection with the

system (refer to the supplied Startup

Guide).

 Enable the Control for HDMI function

on the TV. For details, refer to the

operating instructions of your TV.

 Wait a while, and then try again. If

you unplug the system, it will take a

while before operations can be made.

Wait for 15 seconds or longer, and

then try again.

 Make sure the devices connected to

the system support the Control for

HDMI function.

 Enable the Control for HDMI function

on the devices connected to the

system. For details, refer to the

operating instructions of your device.

 The type and number of devices that

can be controlled by the Control for

HDMI function is restricted by the

HDMI CEC standard as follows:

– Recording devices (Blu-ray Disc

recorder, DVD recorder, etc.): up to

3 devices

– Playback devices (Blu-ray Disc

player, DVD player, etc.): up to 3

devices (this system uses one of

them)

– Tuner-related devices: up to 4

devices

– Audio system (receiver/

headphones): up to 1 device (used

by this system)

“PRTCT” flashes in the front panel

display and the system is turned

off.

 Disconnect the AC power cord (mains

lead) and make sure nothing is

obstructing the ventilation holes of

the system.

“PRTCT,” “PUSH,” speaker name

(“SUB,” “SUR L,” or “SUR R”), and

“POWER” flash alternately in the

front panel display.

 Press  (power) on the

corresponding speaker (“SUB”:

subwoofer, “SUR L”: left rear speaker,

“SUR R”: right rear speaker) to turn

off. For the subwoofer, disconnect

the AC power cord (mains lead) and

make sure nothing is obstructing the

ventilation holes of the subwoofer,

then restart the system. For the rear

speaker, disconnect the AC power

cord (mains lead), then restart the

system. If they are reconnected

properly, the display in the front

panel display returns to the normal

display.

“BT TX” appears in the front panel

display.

 Set [Bluetooth Mode] to [Receiver].

“BT TX” appears if [Bluetooth Mode] is

set to [Transmitter] (page 65).

Sensors of the TV do not work

properly.

 The main unit may block some

sensors (such as the brightness

sensor), the remote control receiver

of your TV or the emitter for 3D

glasses (infrared transmission) of a 3D

TV that supports the infrared 3D glass

system, or wireless communication.

Move the main unit away from the TV

within a range that allow those parts

to operate properly. For the locations

Others

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HT-ZF9 - Soundbar Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony HT-ZF9 - Soundbar

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info