Bedienungsanleitung Sony htp 2000 (Seite 35 von 40) (Englisch)

370440

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Additional Information

masterpage:Right

lename[E:\SEM_Janet\Revision_HTP-

200\J9040000_2103636121HTP1200CEL\2103636121\GB09ADD_HTP-1200-CEL.fm]

model name1[HTP-2000]

model name2[HTP-1200]

103

636

(1)]

If you experience any of the following

difficulties while using the receiver, use this

troubleshooting guide to help you remedy the

problem.

There is no sound or only a very low-level

sound no matter which component is

selected.

• Check that the speakers and components are

connected securely and correctly.

• Check that both the receiver and all components

are turned on.

• Check that you have selected the correct

component on the receiver.

• Check that MASTER VOLUME on the receiver is

not set at

“VOL MIN”.

• Press MUTING to cancel the muting function.

There is no sound from a specific component.

• Check that the component is connected correctly

to the audio input jacks for that component.

• Check that the cord(s) used for the connection is

(are) fully inserted into the jacks on both the

receiver and the component.

• Check that you have selected the correct

component on the receiver.

There is no sound from one of the front

speakers.

• Check that the component is connected correctly

to the audio input jacks for that component.

• Check that the cord(s) used for the connection is

(are) fully inserted into the jacks on both the

receiver and the component.

The left and right sounds are unbalanced or

reversed.

• Check that the speakers and components are

connected correctly and securely.

• Adjust balance parameters in the LEVEL menu.

There is severe hum or noise.

• Check that the speakers and components are

connected securely.

• Check that the connecting cords are away from a

transformer or motor, and at least 3 meters away

from a TV set or fluorescent light.

• Move your TV away from the audio components.

• The plugs and jacks are dirty. Wipe them with a

cloth slightly moistened with alcohol.

There is no sound or only a very low-level

sound is heard from the center or/and

surround speakers.

• Make sure the sound field function is on (press

SOUND FIELD + or SOUND FIELD –).

• Select a CINEMA STUDIO EX mode (page 24).

• Adjust the speaker level (page 16).

There is no sound from the sub woofer.

• Check that the sub woofer is connected correctly

and securely.

The surround effect cannot be obtained.

• Make sure the sound field function is on (press

SOUND FIELD + or SOUND FIELD –).

• Sound fields do not function for the signals with a

sampling frequency of more than 48 kHz.

Dolby Digital or DTS multi channel sound is

not reproduced.

• Check that the playing DVD, etc. is recorded in

Dolby Digital or DTS format.

• When connecting the DVD player, etc. to the

digital input jacks of this receiver, check the audio

setting (settings for the audio output) of the

connected component.

Troubleshooting

continued

GB01COV_HTP-1200-CEL.book Page 35 Thursday, September 23, 2004 6:22 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony htp 2000 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony htp 2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info