Bedienungsanleitung Sony hvr m25p (Seite 21 von 104) (Englisch)

136405

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Chapter 1 Overview 21

Chapter 1 Overview

9 HDV/DV jack (4-pin)

Use this jack to input/output the digital signals that

complies with the i.LINK standard. Use when a device

connected to the unit has an i.LINK jack. If you

connect the unit and another device using

HDV/DV

jack, you can minimize deterioration of picture quality

during recording, dubbing, or capturing still pictures,

all by means of digital signals processing.

For details, refer to the instruction manual of the external

device.

Notes

•When you connect with the i.LINK cable to a

computer and the unit, check the direction of the jack.

If you forcibly insert the jack, the terminal may be

damaged or cause the unit to malfunction. Align v

mark of the i.LINK cable with V mark on the unit

and insert the i.LINK cable.

• This jack is only compatible with HDV (1080i)/

DVCAM/DV signals.

For details, see “About i.LINK” on page 98.

• If video signals have been input to HDV/DV jack

and you output these video signals to the S VIDEO or

VIDEO connectors, the sync and burst of the

corresponding EE picture is not synchronized.

• If the unit is connected to a device equipped with a

6-pin i.LINK jack, when you intend to disconnect or

reconnect the i.LINK cable, turn off the device and

pull out the plug of its power cord from the AC outlet

beforehand. If you connect or disconnect the i.LINK

cable while the device is connected to the AC outlet,

high-voltage current (8 to 40 V) is output from

i.LINK jack of the device to the unit. This may cause

a malfunction.

•When connecting a device that has a 6-pin i.LINK

jack to the unit, connect the plug of the cable to the 6-

pin i.LINK jack first.

For details on each setting when HDV/DV signals are

input, see “HDV/DV SEL” (page 67).

• Video signal which is input from HDV/DV jack

will be output directly to COMPONENT OUT jacks,

S VIDEO jack, and VIDEO jack with the jitter of

i.LINK signal. This jitter may be displayed on the

connected monitor. Be aware of this jitter when you

connect other recording device to for these jacks.

This jitter will not appear on a recording with the

unit.

........................................................................................................................................................................................................

1) LANC (Local Application Control bus system):

Bidirectional interface used to control a consumer VCR

•When you change the video format setting of [HDMI/

CMPNT] in [VIDEO OUT] of [IN/OUT REC] menu,

the video signal output from S VIDEO OUT jack,

VIDEO OUT jack, or

HDV/DV jack may be

distorted.

For details on the output of HDV/DV jack, see “Notes on

all video output jacks” (page 22).

q; LANC jack

Use this jack when controlling the tape transport

operation of the unit using a device that has a LANC

jack.

Notes

• LANC jack on the unit has only LANC-S functions.

The unit has no LANC-M functions. A device that is

set to LANC-S mode cannot be connected to the unit.

Either this, the unit or the other device may not

operate properly.

•When using the unit as a player, set LANC mode on

the recorder to M. A VCR that does not have M/S

switching function cannot be used to control the unit.

• When the device for connecting to the unit has

[LANC-M] function to switch between SHUTTLE A/

B, select SHUTTLE A for HDV-formatted tape, and

SHUTTLE B for the DVCAM/DV (SP)-formatted

tape.

• LANC connection transmits command signals for

playback, stop, pause playback, as well as the time

code, tape counter, and data status of the unit.

• Jacks labeled CONTROL L have the same function

as LANC jacks.

• There are some limitations when you edit an HDV-

formatted tape.

Refer to the “Notes” in “Editing (Connecting with a

Computer)” on page 62.

qa CONTROL S jack

Connect to a remote control unit DSRM-10 (not

supplied) for controlling the unit.

You can use DSRM-20 (no longer manufactured: not

supplied).

Note

When you use a CONTROL S device, set

[COMMANDER] in [OTHERS] menu to [CONTROL

S].

(Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony hvr m25p Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info