136405
27
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
Chapter 1 Overview 27
Chapter 1 Overview
When the count value of the counter is negative, “–”
appears as the first digit (leftmost digit). When that
value is positive, the first digit is blank. When the
format of the displayed time code is the drop frame
mode, the drop frame indicator is displayed as a
period between the minutes and seconds (i.e.,
00:12.58:00).
When user bits are displayed, the space between hour,
minute, and second becomes blanked.
Notes
In the playback mode, if the tape has a portion where
recorded signals are not continuous:
– The count value of the counter may not advance
correctly from that portion.
– The displayed value of the time code or user bits
may be temporarily inaccurate.
•When the unit plays back a part of the tape where the
recorded system has been changed between 50i and
60i, the displayed value may be inaccurate.
•When the unit plays back a part of the tape where the
recording format has been changed among HDV,
DVCAM and DV, the displayed value may be
inaccurate.
The counter operates on a ±12-hour cycle. You
cannot make the counter operate on a 24-hour cycle.
The count value of the counter consists of seven
digits. The tens place of the “hour” is not displayed.
(i.e., If the actual count value is “11:22:11:22”, the
displayed value will be “1:22:11:22.”) However, the
unit recognizes that the hours value is “11”.
Setting the time counter
You can adjust the settings of the time counter display
in [COUNTER SET] in [DISPLAY SET] menu.
DISPLAY : Selects whether to display the time
counter or not.
SIZE : Selects the size of the time counter.
COLOR : Selects the color of the time counter.
For details on [COUNTER SET], see page 71.
STATUS CHECK screen
To display STATUS CHECK screen, press STATUS
CHECK button.
Each time you press J/j button, STATUS CHECK
screen switches in the order of AUDIO, OUTPUT,
ASSIGN, and CUSTOM REPEAT.
To hide STATUS CHECK screen, press STATUS
CHECK button again.
Audio Level Meter and Audio setting screen
Audio Level Meter and Audio setting screen is
displayed when STATUS CHECK screen is set to
[AUDIO].
This screen displays the audio level meter and the
setting values of [AUDIO MONI] in [AUDIO SET]
menu.
For details, see “AUDIO SET” on page 73.
Audio Level Meter
Audio Level Meter can be used to confirm and adjust
the audio level. Audio Level Meter is displayed in
different patterns, depending on the settings of
[AUDIO MODE] and AUDIO OUTPUT switch.
The unit detects the audio mode as follows:
In the playback mode: Detects the audio mode
recorded on the tape.
In the recording/EE mode: Detects the selected
audio mode in [AUDIO MODE] in [AUDIO SET]
menu.
When INPUT SELECT switch is set to HDV/DV
and HDV or DV signals is being input: Detects
the audio mode of the signals being input. (The
setting of [AUDIO MODE] in [AUDIO SET] menu
becomes invalid.)
Audio mode: 48 kHz (2-channel, 16 bits)
(The levels of two channels, channels 1 and 2, are
displayed.)
Audio mode: 32 kHz (4-channel, 12 bits)
(a) When AUDIO OUTPUT SELECT switch is set to
CH-1/2 or CH-3/4
(The levels of four channels, channels 1 to 4, are
displayed. During playback, if the sounds are recorded
onto channels 3 and 4, their levels meters fluctuate.
However, during normal recording, you cannot record
sounds onto the channels 3 and 4.)
AUDIO
AUDIO MONI:
CH1 , CH2
1/4
[
STATUS CHECK
]
: END
(Continued)
AUDIO
AUDIO MONI:
CH1 , CH2
1/4
[
STATUS CHECK
]
: END
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony hvr m25p wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info