Bedienungsanleitung Sony hvr m25p (Seite 41 von 104) (Englisch)

136405

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Chapter 2 Playback and Recording 41

Chapter 2 Playback and Recording

To cancel the AUTO REPEAT

Set TIMER switch to OFF.

By using AUTO REPEAT, you can do the

following as examples

Repeat playbacks with 30 minutes interval :

1 Set [ON/OFF] of [REPEAT CYCLE] to [ON].

2 Set [CYCLE] of [REPEAT CYCLE] to [30 min].

3 Press REW or PLAY button.

Repeat playbacks 5 times for 2 hours per day at 9

a.m. :

1 Set [ON/OFF] of [REPEAT CYCLE] to [ON].

2 Set [CYCLE] of [REPEAT CYCLE] to [120 min].

3 Set [ON/OFF] of [REPEAT TIMES] to [ON].

4 Set [TIMES] of [REPEAT TIMES] to [5].

5 Set [ON/OFF] of [START TIME] to [ON].

6 Set [TIME] of [START TIME] at [9:00].

7 Turn the unit on before 9 a.m.

Notes

• The unit cannot detect signals for Index signal, a

signal other than the one set by [AUTO] in [HDV/DV

SEL], or an unrecorded portion within 20 seconds of

the beginning of the playback.

•When you intend to turn the unit off, press STOP

button on the unit to stop the tape transport operation

beforehand. If you turn the unit off while a tape is

running, for example, by using an AC timer, the unit

or the tape may be damaged.

• The editing software used on the digital non-linear

editing system may mark index signals on a tape

itself. Therefore, if you use a tape on which signals

transmitted from a digital non-linear editing

controller are recorded or a copy tape made from one,

using digital dubbing, Auto Repeat may not be

performed correctly.

EDGE CROP MARKER

The unit allows you to adjust the edge crop position

when you output the down converted HDV 16:9 wide

screen pictures to 4:3 standard TV mode pictures. By

displaying the edge crop marker on the monitor, you

can check the crop position on LCD monitor

beforehand.

To set EDGE CROP MARKER

Either set [CROP MARKER] in [IN/OUT REC] menu

to [ON] after setting [DOWN CONVERT] of [VIDEO

OUT] in [IN/OUT REC] menu to [EDGE CROP] or

[DOWN CONVERT] of [i.LINK SET] in [IN/OUT

REC] to [EDGE CROP].

EDGE CROP MARKER screen displays;

• Crop position of 4:3 aspect screen

• Center marker

• 80% safety zone

CROP ADJUST

[

]

: END

[

]

: END

Select [CROP ADJUST] in [IN/OUT REC] menu and

press EXEC button again after the confirmation

display appears. Then, EDGE CROP MARKER will

appear on the monitor. Press K/k buttons to move

the marker to the left and right and adjust the position

to crop. Press EXEC button to execute.

Notes

•When CROP MARKER is displayed on LCD

monitor, the text data and crop marker displayed on

LCD monitor are not output from jacks on the rear

panel of the unit. To output 4:3 screen marker, see

[MARKER BURN].

• To output an edge cropped picture by down

converting the HDV-formatted picture to 4:3, see

“VIDEO OUT” (page 68) and “i.LINK SET” (page

69) in “IN/OUT REC” menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony hvr m25p Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info