Bedienungsanleitung Sony HVR-V1 (Seite 76 von 151) (Englisch)

62187

Zoom out

Zoom in

Vorherige Seite

1/151

Nächste Seite

HVR-V1E/V1P

2-887-521-12(1)

L:\SONY\PV\CX91030\1130insatuPDF\2887521121_GB\2887521111HVRV1UVIN\01GB06MEN

.fm

b Notes

• This function is effective only when the AUTO/

MAN switches of both CH1 and CH2 are set to

MAN (p. 48).

• When [LINKED] is set, you can adjust the

volume with the AUDIO LEVEL dial of CH1

(p. 48).

x INPUT1 LEVEL

You can switch between microphone and

line for input from the INPUT1 jack.

B MIC

Select to input audio signals from an

external microphone through the INPUT1

jack.

appears on the status check screen.

LINE

Select to input audio signals from an audio

device through the INPUT1 jack.

appears on the status check screen.

x INPUT1 TRIM

You can adjust levels of signal input from

the INPUT1 jack. This function is effective

only when [INPUT1 LEVEL] is set to

[MIC].

You can select from [0dB], [-8dB] and [-

16dB] (the default setting is [0dB]).

x INPUT1 WIND

This function is effective only when

[INPUT1 LEVEL] is set to [MIC].

B OFF

Select to disable wind noise reduction.

Select to enable wind noise reduction.

appears on the status check screen.

x INPUT2 LEVEL

You can switch between microphone and

line for input from the INPUT2 jack.

B MIC

Select to input audio signals from an

external microphone through the INPUT2

jack.

appears on the status check screen.

LINE

Select to input audio signals from an audio

device through the INPUT2 jack.

appears on the status check screen.

x INPUT2 TRIM

You can adjust levels of signal input from

the INPUT2 jack. This function is effective

only when [INPUT2 LEVEL] is set to

[MIC].

You can select from [0dB], [-8dB] and [-

16dB] (the default setting is [0dB]).

x INPUT2 WIND

This function is effective only when

[INPUT2 LEVEL] is set to [MIC].

B OFF

Select to disable wind noise reduction.

Select to enable wind noise reduction.

appears on the status check screen.

z Tips

• The INPUT TRIM function adjusts the input

level from an external microphone. When using

a highly sensitive microphone or recording loud

sound, set this to the minus side. When using a

less sensitive microphone or recording quiet

sound, set it to the plus side.

• When recording loud sound, the sound may be

distorted at either the input point or the

recording point. If it is distorted at the input

point, adjust the sound using the INPUT TRIM

function. If it is distorted at the recording point,

lower the total volume level manually.

• If you set INPUT TRIM too far to the minus

side, the microphone volume becomes too low,

resulting in a poor signal to noise ratio.

• Test the effect of the INPUT TRIM function

according to the microphone used or the sound

field of the recording site before actual

recording.

Press the MENU button t select the (AUDIO SET) by turning the SEL/PUSH EXEC

dial.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HVR-V1 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony HVR-V1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info