Bedienungsanleitung Sony ICD-TX650 (Seite 1 von 2) (Englisch, Spanisch)

594759

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

IC Recorder

ICD-TX650

Startup Guide

4-564-055-11(1)

Refer to the Help Guide

This is the Startup Guide, which provides you with

instructions on the basic operations of the IC recorder.

The Help Guide is an online manual.

Refer to the Help Guide when you would like to know

further details, operations and possible solutions when a

problem occurs.

http://rd1.sony.net/help/icd/t65/h_ce/

Precautions

On power

Operate the unit only on 3.7 V DC with the built-in

rechargeable lithium-ion battery.

On safety

Do not operate the unit while driving, cycling or operating

any motorized vehicle.

On handling

ˎ Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or

mechanical shock.

ˎ Should any solid object or liquid fall into the unit, have the

unit checked by qualified personnel before operating it

any further.

ˎ When using your IC recorder, remember to follow the

precautions below in order to avoid warping the cabinet

or causing the IC recorder to malfunction.

– Do not sit down with the IC recorder in your back pocket.

– Do not put your IC recorder into a bag with the

headphones/earphones cord wrapped around it and

subject the bag to strong impact.

If you have any questions or problems concerning your

unit, please consult your nearest Sony dealer.

Capacity (User available capacity*1*2)

16 GB (approx. 14.40 GB = 15,461,882,265 Byte)

* A small amount of the internal memory is used for file management

and therefore not available for user storage.

* When the built-in memory is formatted with the IC recorder.

Dimensions (w/h/d) (not incl. projecting parts and

controls) (JEITA)*3

Approx. 102.0 mm × 20.0 mm × 7.4 mm

Mass (JEITA)*3

Approx. 29 g

* Measured value by the standard of JEITA (Japan Electronics and

Information Technology Industries Association)

Check the supplied items

ˎ IC Recorder (1)

ˎ Stereo headphones (1)

ˎ USB cable (1)

ˎ Carrying pouch (1)

ˎ Startup Guide (this sheet)

ˎ Warranty card

ˎ Application Software, Sound Organizer (Installer file stored

in the built-in memory so that you can install it to your

computer.)

ˎ Help Guide (HTML file stored in the built-in memory so it

can easily be copied to your computer.)

Optional accessories

ˎ USB AC adaptor AC-UD20



Note

Depending on the country or region, some of the models or

optional accessories are not available.

Let’s try out your new IC recorder

Charge

 Charge the IC recorder.

Using the supplied USB cable, connect the USB

connector inside the USB connector cover to a USB port

of a running computer.

Charging starts.

When the battery is fully charged, the battery indicator

will indicate “

 .”

 Disconnect the IC recorder.

Make sure that the operation indicator does not light.

Then refer to the Help Guide to remove the IC recorder

safely.

Power on

 Turn the power on.

Slide and hold the POWER•HOLD switch in the direction

of “POWER” until the window display appears.

To turn the power off, slide and hold the POWER•HOLD

switch in the direction of “POWER” until “Power Off” is

displayed.

To prevent unintentional operations (HOLD)

¼ To release the IC recorder from the HOLD status, slide the

POWER•HOLD switch towards the center.

Set the initial settings

When you turn on the power for the first time, or when the

clock has not been set, “Setting Date&Time” appears, and

you can set the clock.

 Press  or  to select “Next,” and then press

.

 Press  or  to change the number of the

year, and then press  to enter the number.

Repeat this procedure to set month, day, hour, and

minute in sequence.

You can move the cursor to the previous item by

pressing BACK/HOME.

 Press  or  to select “Next,” and then press

.

The clock reflects the setting and the setting window

for turning the beep sound on or off is displayed.

 Press  or  to select “Yes” or “No,” and then

press .

When you finish setting the beep, the HOME menu

window is displayed.



Notes

ˎ If you do not press any buttons within 1 minute at initial

settings, “Quit Initial Set-up?” or “Quit Beep Settings?” appears

on the display window.

ˎ You can set the clock setting and beep sound setting later. For

details, refer to the Help Guide of the IC recorder.

Select the menu language

 Press and hold BACK/HOME.

 Press  or  to select “ Settings” -

“Common Settings” - “Language,” and then press

.

 Press  or  to select the language that you

want to use in the display window, and then press

.

You can select the following languages:

Deutsch (German), English*, Español (Spanish), Français

(French), Italiano (Italian),  (Russian)

* Default setting

 Press and hold BACK/HOME to return to the HOME

menu.

Record

Operation indicator

¼ Before you start using the IC recorder, make sure that you

slide the POWER•HOLD switch towards the center to release

the HOLD status.

 Press .

Recording starts and the operation indicator lights in

red.

 Place the IC recorder so that the built-in

microphones face the direction of the source to be

recorded.

 Press  again to stop recording.

“Saving...” appears and the display returns to the

recording stop mode window.

By pressing  after you stop recording, you can play

back the file just recorded.

Listen

Operation indicator

 Press  or  to select “ Recorded Files”

from the HOME menu, and then press .

 Press  or  to select the desired folder, and

then press .

 Press  or  to select the desired file, and

then press .

Playback starts and the operation indicator lights in

green.

 Adjust the volume by pressing VOL –/+.

 Press  to stop playback.

¼ The built-in speaker is for checking the recorded sound, so

the volume is limited. If playback sound is not loud enough

or is difficult to hear, use headphones.

Delete



Note

Once a file is deleted, you cannot restore it.

 Select the file you want to delete from the list of

recorded files or play back the file you want to

delete.

 Press OPTION, press  or  to select “Delete a

File,” and then press .

“Delete?” appears and the specified file is played back

for confirmation.

 Press  or  to select “Yes,” and then press

.

“Please Wait” appears in the display window and the

selected file will be deleted.

Using the HOME menu

You can display the HOME menu to use each function by

pressing and holding BACK/HOME.

The HOME menu allows you to select a function, search

your recorded files, or change the settings on the IC

recorder.

 Press and hold BACK/HOME.

The HOME menu window appears.

The HOME menu items are aligned in the following

sequence.

Podcast Recorded

Files

Record Settings Return to

XX*

Music

* The function you are currently using

is displayed in “XX.”

 Press  or  to select the function you want

to use, and then press .

You can select the functions listed below:

Podcast

You can select podcast files

imported from a computer, and play

them back.

Music

You can select music files imported

from a computer, and play them

back.

Recorded Files

You can select files recorded using

the IC recorder, and play them back.

The recorded files are stored in a

FOLDER.

Record

You can display the recording

window. To start recording, press

.

Settings

You can display the Settings menu

and change various settings on the

IC recorder.

Return to XX*

Select this item to return to the

window displayed before entering

the HOME menu.

* The function you are currently

using is displayed in “XX.”

Using the OPTION menu

You can display the OPTION menu by pressing OPTION.

The OPTION menu items vary for each function of the IC

recorder, and allow you to change various settings, etc.

 Select the function you want to use from the

HOME menu, press  and then press OPTION.

The OPTION menu items for the function you have

selected are displayed.

 Press  or  to select the menu item for

which you want to make setting, and then press

.

 Press  or  to select the setting that you

want to set, and then press .

¼ About details of the setting items with each function, refer to

the Help Guide.

Installing Sound Organizer

Refer to the Help Guide of the IC recorder to install Sound

Organizer on your computer.



Notes

ˎ Sound Organizer is compatible with the Windows PC only. It is

not compatible with Mac.

ˎ If you format the built-in memory, all data stored there will be

erased. (The Help Guide and the Sound Organizer software will

also be erased.)

¼ When installing Sound Organizer, log in to an account with

administrator privileges.

WARNING

Do not expose the batteries (battery pack or batteries installed)

to excessive heat such as sunshine, fire or the like for a long

time.

Notice for the customers: the following information

is only applicable to equipment sold in the countries

applying EU directives

Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo,

108-0075 Japan

For EU product compliance: Sony Deutschland GmbH,

Hedelfinger Strasse 61, 70327 Stuttgart, Germany

To prevent possible hearing damage, do not listen at high

volume levels for long periods.

The display turns off

automatically

Press BACK/HOME to turn on the display.

The screen off timer is set to “Auto Screen Off” by default

for saving battery power.

If no operation is attempted for approximately 30 seconds

in the stop mode and for approximately 10 seconds in

the recording and playback modes, the display turns off

automatically.

You can perform a button operation, however, even while

the display is off.

¼ To change the settings, press and hold BACK/HOME and

select “

Settings” - “Common Settings” - “Screen Off

Timer” - “No Auto Screen Off.”

Sony ICD-TX650 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony ICD-TX650

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info