787412
430
Zoom out
Zoom in
Vorherige Seite
1/458
Nächste Seite
Symptom Cause Solution
The configured IP
address is in use on
another device.
Check that the IP addresses of peripheral devices are
unique.
The configured subnet
mask does not match
the used network
subnet.
Perform a network reset.
The unit is being
accessed on the same
local network via a
proxy.
Change the configuration so that a proxy server is not
used.
The configured default
gateway for the unit is
incorrect.
Perform a network reset.
The entered URL is
incorrect. Enter the correct URL and try again.
The HTTP port is
incorrect.
Display the camera menu on an external monitor and
check the setting of [Network] > [Wired LAN] > [HTTP
Port]. If a value other than 80 is configured, add the
HTTP port number to the host name or IP address
entered in the web browser.
Example: If HTTP Port is set to 8080, enter http://<IP
Address>:8080
The HTTP port number
of the unit is being
filtered or blocked.
Change the HTTP port number of the unit to a port that
is not being filtered or blocked.
Old cache of the web
browser is having an
adverse effect.
Delete the cache from the web browser.
Cannot connect to the Web
App using the 2D code (QR
code).
The device being used
does not support
mDNS.
Use a device that supports mDNS.
If using a device that does not support mDNS, enter the
IP address directly into the web browser.
The tablet or computer
is connected to a
different network than
the camera.
Connect the tablet or computer to the same network as
the camera.
Cannot connect to the Web
App by manually entering the
URL.
The device being used
does not support
mDNS.
Use a device that supports mDNS.
The tablet or computer
is connected to a
different network than
the camera.
Connect the tablet or computer to the same network as
the camera.
The authentication screen is
displayed continuously. The correct user name
or password was not
entered.
Enter the registered user name and password. If you
have forgotten the registered user information, see
“RESET switch” in “Connector Block” to initialize the
user information for network connection.
430
430

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony ILME-FR7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sony ILME-FR7

Sony ILME-FR7 Bedienungsanleitung - Deutsch - 467 seiten

Sony ILME-FR7 Bedienungsanleitung - Holländisch - 465 seiten

Sony ILME-FR7 Bedienungsanleitung - Französisch - 470 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info