Bedienungsanleitung Sony KD-49XF7596 (Seite 3 von 316) (Alle Sprachen)

676169

Zoom out

Zoom in

Vorherige Seite

1/316

Nächste Seite

NOTICE FOR CUSTOMERS IN THE UNITED

KINGDOM

A moulded plug complying with BS1363 is fitted to this equipment

for your safety and convenience.

Should the fuse in the plug supplied need to be replaced with the

same rating of fuse approved by ASTA or BSI to BS 1362 (i.e.,

marked with

or ) must be used.

If the plug supplied with this equipment has a detachable fuse

cover, be sure to attach the fuse cover after you change the fuse.

Never use the plug without the fuse cover. If you should lose the

fuse cover, please contact your nearest Sony service station.

How to replace the fuse

Open the fuse compartment with a blade screwdriver, and

replace the fuse.

Please refer to the illustration that actually equipped with the

product.

Notice for Radio Equipment

Hereby, Sony Visual Products Inc. declares

that the radio equipment types

KD-65XF7596, KD-55XF7596,

KD-49XF7596, KD-43XF7596 are in compliance with Directive

2014/53/EU. The full text of the EU declaration of conformity is

available at the following internet address:

http://www.compliance.sony.de/

This radio equipment can be operated in the EU without

infringing applicable requirements on the use of radio spectrum.

Notice for customers: the following information is only applicable

to equipment sold in countries applying EU directives.

TV wireless system may be operated in following countries:

AT, BE, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT,

NL, PL, PT, SK, SI, ES, SE, UK, IS, LI, NO, CH, BG, RO, TR, AL, BA, MK,

MD, RS, ME, Kosovo

This equipment can be operated in other non-European

countries.

WARNING

Caution

Risk of explosion if the battery is replaced by an incorrect type.

Batteries must not be exposed to excessive heat such as

sunshine, fire or the like or extremely low air pressure that can

result in an explosion or leakage of flammable liquid or gas.

Stability Hazard

The television set may fall, causing serious personal injury or

death.

Never place a television set in an unstable location. A television

set may fall, causing serious personal injury or death. Many

injuries, particularly to children, can be avoided by taking simple

precautions such as:

• Using cabinets or stands recommended by the manufacturer of

the television set.

• Only using furniture that can safely support the television set.

• Ensuring the television set is not overhanging the edge of the

supporting furniture.

• Not placing the television set on tall furniture (for example,

cupboards or bookcases) without anchoring both the furniture

and the television set to a suitable support.

• Not placing the television set on cloth or other materials that

may be located between the television set and supporting

furniture.

• Educating children about the dangers of climbing on furniture

to reach the television set or its controls.

If your existing television set is being retained and relocated, the

same considerations as above should be applied.

Installation/Set-up

Install and use the TV set in accordance with the instructions

below in order to avoid any risk of fire, electric shock or damage

and/or injuries.

Apparatus connected to the protective earthing of the building

installation through the mains connection or through other

apparatus with a connection to protective earthing – and to a

television distribution system using coaxial cable, may in some

circumstances create a fire hazard. Connection to a television

distribution system therefore has to be provided through a device

providing electrical isolation below a certain frequency range

(galvanic isolator, see EN 60728-11).

Installation

• The TV set should be installed near an easily accessible mains

socket.

• Place the TV on a stable, level surface to prevent it from falling

over and causing personal injury or property damage.

• Install the TV where it cannot be pulled, pushed, or knocked

over.

• Install the TV so that the TV’s Table-Top Stand does not protrude

out from the TV stand (not supplied). If the Table-Top Stand

protrudes out from the TV stand, it may cause TV set to topple

over, fall down, and cause personal injury or damage to the TV.

• Only qualified service personnel should carry out wall-mount

installations.

• For safety reasons, it is strongly recommended that you use

Sony accessories, including:

 Wall-Mount Bracket SU-WL450

IMPORTANT NOTICE

This product has been manufactured by or on behalf of Sony

Visual Products Inc.

EU Importer: Sony Europe Limited.

Inquiries to the EU Importer or related to product compliance

in Europe should be sent to the manufacturer’s authorized

representative, Sony Belgium, bijkantoor van Sony Europe

Limited, Da Vincilaan 7-D1, 1935 Zaventem, Belgium.

Safety Information

FUSE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KD-49XF7596 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info