Bedienungsanleitung Sony kdep42xs1 (Seite 46 von 196) (Deutsch, Englisch, Französisch, Spanisch)

142557

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

Stripe noise during playback/recording

of a VCR.

• Video head interference. Keep your VCR away from the TV.

• Leave a space of 30 cm between your VCR and the TV set to avoid

noise.

• Avoid installing your VCR in front or at the side of the TV set.

Poor or no picture (screen is dark), but

good sound.

• Using the menu system, select the “Picture Adjustment” menu and

select “Reset” to return to the factory settings (page 19).

• If the PICTURE OFF indicator lights up in blue, press

(picture off) on the remote control.

Noisy picture when viewing a TV

channel.

• Using the menu system, select the “Manual Programme Preset”

option in the “Set Up” menu and adjust Fine Tuning (AFT) to

obtain better picture reception (page 28).

• Using the menu system, set the "Noise Reduction" option in the

“Picture Adjustment” menu to reduce the noise in the picture (page

19).

Distorted picture when changing

programmes or selecting teletext.

• Turn off any equipment connected to the Scart connector on the rear

of the TV set.

• Using the menu system, select the “Features” menu, next select the

“Screen Saver” submenu and finally set the “All White” option to

“On” to reduce the image retention (see page 24).

• This is inherent in the Plasma Display Panel, and does not indicate

a malfunction.

Wrong characters appear when viewing

teletext.

• Using the menu system, enter the “Country” option in the “Set Up”

menu and select the country in which you operate the TV set (page

26). For Cyrillic languages, we recommend that you select Russia

if your own country does not appear in the list.

Wrong characters appear when viewing

NexTView.

• Using the menu system, enter the “Language” option in the “Set

Up” menu and select the language as the NexTView is broadcasted

(page 37).

No sound/Noisy sound.

Good picture, no sound. • Press the 2 + on the remote control.

• Check that “TV Speakers” option is set to “Main” in the “Sound

Adjustment” menu (page 21).

Audio noise. • Make sure that the aerial is connected using the supplied coaxial

cable.

• Keep the aerial cable away from other connecting cords.

• Do not use 300-ohm twin lead cables as interference may occur.

• Communication problems may occur if the infrared communication

equipment (e.g. infrared cordless headphones) is used near the TV.

Please use headphones other than infrared cordless headphones,

move the infrared transceiver away from the TV until the noise is

eliminated, or move the transmitter and receiver of the infrared

communication equipment closer together.

Problem Possible solution

Additional Information

continued...

In the screen appears an image retention

(afterimage)

The screen flickers when turning on the

TV.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony kdep42xs1 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony kdep42xs1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info