Bedienungsanleitung Sony kdep61mrx1 (Seite 2 von 2) (Englisch)

142558

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Your television stations are now stored in your television’s memory.

1 It is important that you connect the Media

Receiver Unit and the Display Unit to the

mains socket (220-240V AC, 50/60Hz) in

the following order:

First:

Media Receiver Unit

Second:

Display Unit

2 The first time that the TV set is connected, it

is usually turned on. If the TV is off, press

the Power switch on the media receiver

unit to turn on the TV.

The ﬁrst time you press the Power switch,

a Language menu displays automatically on

the TV screen.

1 Press the // or button on the

remote control to select the language, then

press the OK button to confirm your

selection.

From now on all the menus will appear in

the selected language.

2 The Country menu appears automatically

on the TV screen.

Press the or button to select the

country in which you will operate the TV

set, then press the OK button to conﬁrm

your selection.

• If the country in which you want to

use the TVset does not appear in the

list, select “off” instead of a country.

3 The Clock Set menu appears on the TV

screen.

a) Press or to set the hour, then press

b) Press or to set the minutes, then

press .

c) Press or to set the day of a week,

then press OK at the time signal.

The clock starts.

A diagram showing you how to connect

equipment to your TV set appears on the

TV screen. Follow the instructions and

finally press the OK button to remove the

picture and continue the automatic tuning

process.

The connection diagram should be

used as a guide only as most

equipment can be connected to more

than one type of TV socket. Once the

TV has completed the automatic

tuning process, refer to the

‘Connection Guide’ section on page

27 of the instruction manual for

further information on getting the

best set up for your equipment.

Country

Select country

Off

Ireland

Nederland

België/Belgique

Luxembourg

France

Italia

Schweiz/Suisse/Svizzera

Clock Set

0 0 : 0 0 : 0 0 Mon

Please connect your equipment

according to this chart

DVD

Picture Adjustment

Select: Enter:

Exit:

Picture Mode: Live

Contrast:

Reset:

Noise Reduction: Auto

Colour Tone: Normal

Film Mode: Auto

1 Press the OK button on the remote control

to select Yes.

2 The TV starts to automatically search and

store all available broadcast channels for

you.

This procedure could take some

minutes.

Please be patient and do not press

any buttons while the auto tuning is

in progress, otherwise the auto tuning

will not be completed.

If no channels were found during the

auto tuning process then a new menu

appears automatically on the screen

asking you to connect the aerial.

Please connect the aerial (refer to the

step 4) and press OK. The auto

tuning process will start again.

When the auto tuning is finished, the

Programme Sorting menu appears on the

screen.

Do you want to start

automatic tuning?

Yes No

Auto Tuning

Programmes found: 4

No channel found.

Please connect aerial

Confirm

Programme Sorting

TVE

TVE2

TV3

C33

C27

C58

S02

S06

Automatically Tune the

You need to tune the TV to receive channels (TV Broadcast). By

following the instructions below, this set automatically searches

and stores all available channels for you.

Selecting the language of the menu

screens, the country and setting

the current time

This TV set works with menu screens. By following the

instructions below, you can select the desired language

of the menu screens, the country in which you wish to

operate the TV set and set the current time.

Switching on the set

Changing the Programme Order

of the broadcast channels

By following the instrutions below, you can rearrange the

order in which the broadcast channels appear on the screen.

a) If you wish to keep the broadcast

channels in the tuned order:

Press the MENU button on the remote

control to exit and return to the normal TV

screen.

Your set is now ready for use.

b) If you wish to store the broadcast

channels in a different order:

1 Press the or button to select the

programme number with the channel (TV

Broadcast) you wish to rearrange, then

press the button.

2 Press the or button to select the new

programme number position for your

selected channel (TV Broadcast), then

press .

The selected broadcast channel now

moves to its new programme position

and the other broadcast channels

move accordingly.

3 Repeat steps 1) and 2) if you wish to

change the order of the other channels.

4 Press the MENU button on the remote

control to exit and return to the normal TV

screen.

The TV set is now ready for use.

Programme Sorting

TVE

TVE2

TV3

C33

C27

C58

S02

S06

Programme Sorting

TVE

TVE2

TV3

C33

C27

C58

S02

S06

Programme Sorting

01 TVE

TVE

TVE2

TV3

C33

C27

C58

S02

S06

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony kdep61mrx1 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony kdep61mrx1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info