Bedienungsanleitung Sony KDL-26P25XX (Seite 27 von 83) (Polnisch)

43089

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

KDL-40/32/26U2000

2-693-044-41(0)

Additional Information

PC Input Signal Reference Chart

• This TV’s PC input does not support Sync on Green or Composite Sync.

• This TV’s PC input does not support interlaced signals.

• This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. For other signals, you will see the

message “NO SYNC”.

Troubleshooting

Check whether the 1 (standby) indicator is flashing in red.

When it is flashing

The self-diagnosis function is activated.

1 Measure how long the 1 (standby) indicator flashes and stops flashing.

For example, the indicator flashes for two seconds, stops flashing for one second, and flashes for two seconds.

2 Press 1 on the TV (top side) to switch it off, disconnect the mains lead, and inform your dealer or

Sony service centre of how the indicator flashes (duration and interval).

When it is not flashing

1 Check the items in the tables below.

2 If the problem still persists, have your TV serviced by qualified service personnel.

Signals Horizontal (Pixel) Vertical (Line)

Horizontal

frequency (kHz)

Vertical

frequency (Hz)

Standard

VGA 640 480 31.5 60 VGA

SVGA 800 600 37.9 60 VESA Guidelines

XGA 1024 768 48.4 60 VESA Guidelines

WXGA 1280 768 47.4 60 VESA

1280 768 47.8 60 VESA

Picture

Problem Cause/Remedy

No picture (screen is dark) and

no sound

• Check the aerial connection.

• Connect the TV to the mains, and press 1 on the TV (top side).

•If the 1 (standby) indicator lights up in red, press "/1.

No picture or no menu

information from equipment

connected to the scarts or

HDMI IN socket

• Check that the optional equipment is on and press / repeatedly until

the correct input symbol is displayed on the screen.

• Check the connection between the optional equipment and the TV.

• When connecting any equipment to the HDMI IN 6, 7 socket or when

changing the resolution, some dots can appear blinking on the screen for a

few seconds. HDMI signal decoding is in progress and it does not indicate a

malfunction.

Double images or ghosting

• Check aerial/cable connections.

• Check the aerial location and direction.

Only snow and noise appear

on the screen

• Check if the aerial is broken or bent.

• Check if the aerial has reached the end of its serviceable life (three to five

years in normal use, one to two years at the seaside).

Distorted picture (dotted lines

or stripes)

• Keep the TV away from electrical noise sources such as cars, motorcycles,

hair-dryers or optical equipment.

• When installing optional equipment, leave some space between the optional

equipment and the TV.

• Make sure that the aerial is connected using the supplied coaxial cable.

• Keep the aerial cable away from other connecting cables.

010COV.book Page 27 Friday, January 19, 2007 9:53 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-26P25XX Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony KDL-26P25XX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info