145051
5
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
W:\PRODUCCIO\FEBRERO 2010\4135 AZ1N RC2\4-168-148-14(1)\00COV-AZN1\010COV.fm
4-168-148-
xxxxx/xxxxx
4-168-148-14(1)
LCD
Digital Colour TV
Operating Instructions
Start-up Guide
i-MANUAL
Additional Information
KDL-46EX4xx / KDL-40BX4xx / KDL-40EX4xx / KDL-40EX6xx / KDL-40NX5xx /
KDL-37EX4xx / KDL-32BX3xx / KDL-32BX4xx / KDL-32EX3xx / KDL-32EX4xx /
KDL-32EX6xx / KDL-32NX5xx / KDL-26EX3xx / KDL-22EX3xx
010COV.fm Page 1 Monday, February 22, 2010 10:37 AM
(1)15
© 2010 Sony Corporation
For useful information about Sony products
4-168-148-1 (1)
100BCO.fm Page 1 Monday, February 22, 2010 10:36 AM
5
416814815
2
GB
KDL-40/32P36xx KDL-40/37/32P56xx KDL-40/37/32S56xx
4-127-735-11(1)
NOTICE FOR
CUSTOMERS IN THE
UNITED KINGDOM
A moulded plug complying with BS1363 is fitted to this
equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced with
the same rating of fuse approved by ASTA or BSI to BS
1362 (i.e., marked with or ) must be used.
When an alternative type of plug is used it should be fitted
with the same rating of fuse, otherwise the circuit should be
protected by a 10 AMP FUSE at the distribution board.
If the plug supplied with this equipment has a detachable fuse
cover, be sure to attach the fuse cover after you change the
fuse. Never use the plug without the fuse cover. If you should
lose the fuse cover, please contact your nearest Sony service
station.
How to replace the fuse
Open the fuse compartment with a blade screwdriver, and
replace the fuse.
Please refer to the illustration that actually equipped with the
product.
Thank you for choosing this Sony product.
Before operating the TV, please read this manual thoroughly
and retain it for future reference.
Any functions related to Digital TV ( ) will only work in
countries or areas where DVB-T (MPEG-2 and H.264/
MPEG-4 AVC) digital terrestrial signals are broadcast or
where you have access to a compatible DVB-C (MPEG-2 and
H.264/MPEG-4 AVC) cable service. Please confirm with
your local dealer if you can receive a DVB-T signal where you
live or ask your cable provider if their DVB-C cable service is
suitable for integrated operation with this TV.
Your cable provider may charge a fee for their services, or
require you to agree to its terms and conditions of business.
This TV set complies with DVB-T and DVB-C
specifications, but compatibility with future DVB-T
digital terrestrial and DVB-C digital cable broadcasts are
not guaranteed.
Some Digital TV functions may not be available in some
countries/areas and DVB-C cable may not operate
correctly with some providers.
For a list of compatible cable providers, refer to the support
web site:
http://support.sony-europe.com/TV/DVBC/
is a registered trademark of the DVB Project
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX,Inc. This is an official DivX Certified
device that plays DivX video. Visit www.divx.com for
more information and software tools to convert your files
into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certifie device must be registered in order to play DivX
Video-on-Demand (VOD) content. To generate the
registration code, locate the DivX VOD section in the device
setup menu. Go to vod.divx.com with this code to complete
the registration process and learn more about DivX VOD.
“BRAVIA” and are trademarks of Sony
Corporation.
“XMB™” and “XrossMediaBar” are trademarks of Sony
Corporation and Sony Computer Entertainment Inc.
The “xx” that appears on the model name, corresponds to
two numeric digits related to design or colour variation.
~
The illustrations used in this manual are of the KDL-
32EX402 unless otherwise stated.
Labels for Model No. and Power Supply rating (in
accordance with applicable safety regulation) are located on
the rear of the TV.
Introduction
Notice for Digital TV function
FUSE
FUSE
The manufacturer of this product is Sony Corporation,
1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The
Authorized Representative for EMC and product
safety is Sony Deutschland GmbH, Hedelfinger
Strasse 61, 70327 Stuttgart, Germany. For any service
or guarantee matters please refer to the addresses given
in separate service or guarantee documents.
Trademark information
About the model name in this manual
Location of the identification label
020REG.fm Page 2 Thursday, March 18, 2010 11:11 AM
3
GB
Safety information.............................................................................................................9
Precautions......................................................................................................................10
Navigating through the Instruction Manual..................................................................11
Installing the Accessories (Wall-Mount Bracket).........................................................12
Specifications..................................................................................................................15
Troubleshooting..............................................................................................................18
Start-up Guide 4
i-MANUAL
Additional Information
Table of Contents
: for digital channels only
• Before operating the TV, please read “Safety Information” 9. Retain this manual for future reference.
• Full operating instructions can be found on the screen.
• Instructions about “Installing Wall Mount Bracket” are included within this TV’s instructions manual.
010COVTOC.fm Page 3 Tuesday, January 12, 2010 6:53 PM
4
GB
Start-up Guide
1: Checking the
accessories
Mains lead (1) (only for KDL-46EX4xx)
Cable holder (1) (only for KDL-40/32NX5xx)
Stand (1)*
Screws for stand (4) (only for KDL-46EX4xx)
Screws for stand (4 + 3) (only for KDL-40BX4/EX4xx,
KDL-37EX4xx, KDL-32BX3/BX4/EX3/EX4xx, KDL-
26EX3xx, KDL-22EX3xx)
Screws for stand (4 + 4) (only for KDL-40/32EX6xx,
KDL-40/32NX5xx)
Remote RM-ED022 (1)
Remote RM-ED036 (1) (only for KDL-40/32EX6xx)
Size AAA batteries (2)
* Disassembled except for KDL-46EX4xx.
To insert batteries into the remote
(only for KDL-40/32EX6xx)
~
Observe the correct polarity when inserting batteries.
Do not use different types of batteries together or mix
old and new batteries.
Dispose of batteries in an environmentally friendly way.
Certain regions may regulate disposal of batteries.
Please consult your local authority.
Handle the remote with care. Do not drop or step on it,
or spill liquid of any kind onto it.
Do not place the remote in a location near a heat source,
a place subject to direct sunlight, or a damp room.
2: Attaching the stand
Follow the assembling steps required to place on a
TV stand.
1 Refer to the supplied Table-Top Stand
leaflet for proper attachment for some TV
models.
2 Place the TV set on the stand. Take care
not to interfere with cables.
3 Fix the TV to the stand according to the
arrow marks that guide the screw
holes using the supplied screws.
~
If using an electric screwdriver, set the tightening torque
at approximately 1.5 N·m (15 kgf·cm).
Only for KDL-22EX3xx
030STU.fm Page 4 Tuesday, January 12, 2010 10:03 AM
KDL-40/32P36xx KDL-40/37/32P56xx KDL-40/37/32S56xx
4-141-451-11(0)
5
GB
Start-up Guide
3: Connecting an
aerial/cable/VCR/DVD
recorder
~
AV1 outputs available only for analogue TV.
AV2 outputs to the current screen (except PC, HDMI,
Component, USB).
4: Preventing the TV
from toppling over
1 Install a wood screw (4 mm in diameter,
not supplied) in the TV stand.
Coaxial cable
Connecting an aerial/cable only
Connecting an aerial/cable/VCR/DVD recorder with
SCART
Scart lead
VCR/DVD recorder
Coaxial cable
Coaxial cable
Terrestrial signal
or cable
Terrestrial
signal or
cable
Connecting an aerial/cable/VCR/DVD recorder with
HDMI
HDMI cable
Coaxial cable
Coaxial
cable
VCR/DVD recorder
Terrestrial signal
or cable
2
1
3
Continued
030STU.fm Page 5 Thursday, December 10, 2009 10:50 AM
6
GB
KDL-40/32P36xx KDL-40/37/32P56xx KDL-40/37/32S56xx
4-141-451-11(0)
2 Install a machine screw (M4 × 16, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine
screw with a strong cord.
z
An optional Sony support belt kit is used to secure the TV.
Contact your nearest Sony Service Centre to purchase a
kit. Have your TV model name ready for reference.
5: Bundling the cables
(only for KDL-40/32NX5xx)
You can bundle the connecting cables as illustrated
below.
~
Do not bundle the mains lead with other connecting
cables.
6:
Selecting the
language, country/region
and location
1 Connect the TV to your mains socket
(220-240V AC, 50Hz).
2 Press 1 on the side of the TV.
When you turn on the TV for the first time, the
Language menu appears on the screen.
~
When you turn on the TV, the power indicator light
up in green.
3 Press F/f to select the language
displayed on the menu screens, then
press
.
KDL-32NX5xx
KDL-40NX5xx
3,4,5
030STU.fm Page 6 Thursday, December 10, 2009 10:50 AM
KDL-40/32P36xx KDL-40/37/32P56xx KDL-40/37/32S56xx
4-141-451-11(0)
7
GB
Start-up Guide
4 Press F/f to select the country/region in
which you will operate the TV, then press
.
If the country/region which you want to use on
the TV does not appear in the list, select “-
instead of a country/region.
5 Press F/f to select the location type in
which you will operate the TV, then
press .
In Shop mode, some settings will be periodically
reset for Shop usage.
This option selects the initial picture mode
appropriate for the typical lighting condition in
these environments.
7: Auto-tuning the TV
1 Press .
2 Press F/f to select “Antenna” or “Cable”,
then press .
If you select “Cable”, the screen for selecting the
scan type appears. See “To tune the TV for Cable
connection” (page 7).
The TV starts searching for all available digital
channels, followed by all available analogue
channels. This may take some time, so do not
press any buttons on the TV or remote while
proceeding.
If a message appears for you to confirm the
aerial connection
No digital or analogue channels were found.
Check all the aerial/cable connections and press
to start auto-tuning again.
3 Programme Sorting (Only in analogue
mode): Changes the order in which the
analogue channels are stored on the TV.
1 Press F/f to select the channel you want to
move to a new position, then press
g.
2 Press
F/f to select the new position for your
channel, then press .
If you do not change the order in which the
analogue channels are stored on the TV, press
HOME to go to next step.
~
• This step will not appear if any analogue channel is
found.
The message "Set-up complete" will appear on
the screen. Press .
The TV has now tuned in all the available
channels.
z
System Update
You can update the TV system using USB memory.
Obtain information from the website below.
http://support.sony-europe.com/TV/
To tune the TV for Cable connection
1 Press .
2 Press F/f to select “Quick Scan” or “Full
Scan”, then press .
"Quick Scan" : channels are tuned according to
the cable operator information within the
broadcast signal.
Recommended setting for "Frequency" and
"Network ID" is "Auto".
This option is recommended for fast tuning when
supported by your cable operator.
If the "Quick Scan" does not tune, please use the
"Full Scan" method below.
"Full Scan" : All available channels are tuned
and stored. This procedure may take some time.
This option is recommended when "Quick Scan"
is not supported by your cable provider.
For further information about supported cable
providers, refer to support web site:
http://support.sony-europe.com/TV/DVBC
3 Press G/g/f to select “Start”.
The TV starts searching for channels. Do not
press any buttons on the TV or remote.
~
Some cable providers do not support “Quick Scan”. If no
channels are detected using “Quick Scan”, perform “Full
Scan”.
030STU.fm Page 7 Thursday, March 18, 2010 1:47 PM
8
GB
KDL-40/32P36xx KDL-40/37/32P56xx KDL-40/37/32S56xx
4-141-451-11(0)
Adjusting the viewing
angle of the TV
This TV can be adjusted within the angles shown
below.
(only for KDL-40/32NX5xx)
Adjust the angle left and right (swivel)
(only for KDL-22EX3xx)
Adjust the tilt
Detaching the Table-
Top Stand from the TV
~
Do not remove the Table-Top Stand for any reason other
than to wall-mount the TV.
(only for KDL-22EX3xx )
z
Be sure the TV is on the vertical position before
switching on. TV set must not be powered on with LCD
panel face down to avoid uneven picture uniformity.
Top view
Front
Table-Top
Stand
Table-Top
Stand
030STU.fm Page 8 Thursday, March 18, 2010 1:47 PM
9
GB
W:\PRODUCCIO\ENERO 2010\4056 AZ1N RC\4-168-148-
13(1)\040SAF.fm
masterpage:Left
Safety
Information
Installation/Set-up
Install and use the TV set in accordance
with the instructions below in order to
avoid any risk of fire, electrical shock or
damage and/or injuries.
Installation
The TV set should be installed near an
easily accessible mains socket.
Place the TV set on a stable, level
surface.
Only qualified service personnel should
carry out wall installations.
For safety reasons, it is strongly
recommended that you use Sony
accessories, including:
Wall-mount bracket SU-WL500
(KDL-46EX4xx, KDL-40BX4/EX4/
EX6/NX5xx, KDL-37EX4xx, KDL-
32BX3/BX4/EX3/EX4/EX6/NX5xx)
Wall-mount bracket SU-WL100
(KDL-26EX3xx, KDL-22EX3xx)
Be sure to use the screws supplied with
the Wall-mount bracket when attaching
the mounting hooks to the TV set. The
supplied screws are designed so that they
are 8 mm to 12 mm in length when
measured from the attaching surface of
the mounting hook.
The diameter and length of the screws
differ depending on the Wall-mount
bracket model.
Use of screws other than those supplied
may result in internal damage to the TV
set or cause it to fall, etc.
Transporting
•Before
transporting the
TV set, disconnect
all cables.
Two or three
people are needed
to transport a large
TV set.
When
transporting the
TV set by hand,
hold it as shown
on the right. Do
not put stress on
the LCD panel.
When lifting or
moving the TV
set, hold it firmly
from the bottom.
When transporting the TV set, do not
subject it to jolts or excessive vibration.
When transporting the TV set for repairs
or when moving, pack it using the
original carton and packing material.
Ventilation
Never cover the ventilation holes or
insert anything in the cabinet.
Leave space around the TV set as shown
below.
It is strongly recommended that you use
a Sony wall-mount bracket in order to
provide adequate air-circulation.
Installed on the wall
Installed with stand
To ensure proper ventilation and prevent
the collection of dirt or dust:
Do not lay the TV set flat, install
upside down, backwards, or
sideways.
Do not place the TV set on a shelf,
rug, bed or in a closet.
Do not cover the TV set with a cloth,
such as curtains, or items such as
newspapers, etc.
Do not install the TV set as shown
below.
Mains lead
Handle the mains lead and socket as
follows in order to avoid any risk of fire,
electrical shock or damage and/or injuries:
Use only mains leads supplied by
Sony, not other suppliers.
Insert the plug fully into the mains
socket.
Operate the TV set on a 220–240 V AC
supply only.
When wiring cables, be sure to unplug
the mains lead for your safety and take
care not to catch your feet on the
cables.
Disconnect the mains lead from the
mains socket before working on or
moving the TV set.
Keep the mains lead away from heat
sources.
Unplug the mains plug and clean it
regularly. If the plug is covered with
dust and it picks up moisture, its
insulation may deteriorate, which
could result in a fire.
Notes
Do not use the supplied mains lead on
any other equipment.
Do not pinch, bend, or twist the mains
lead excessively. The core conductors
may be exposed or broken.
Do not modify the mains lead.
Do not put anything heavy on the mains
lead.
Do not pull on the mains lead itself when
disconnecting the mains lead.
Do not connect too many appliances to
the same mains socket.
Do not use a poor fitting mains socket.
Prohibited Usage
Do not install/use the TV set in locations,
environments or situations such as those
listed below, or the TV set may
malfunction and cause a fire, electrical
shock, damage and/or injuries.
Location:
Outdoors (in direct sunlight), at the
seashore, on a ship or other vessel, inside a
vehicle, in medical institutions, unstable
locations, near water, rain, moisture or
smoke.
Environment:
• To prevent the spread of fire,
keep candles or other open
flames away from this
product at all time.
Places that are hot, humid, or
excessively dusty; where insects may
enter; where it might be exposed to
mechanical vibration, near flammable
objects (candles, etc). The TV set shall
not be exposed to dripping or splashing
and no objects filled with liquids, such
as vases, shall be placed on the TV.
Situation:
Do not use when your hands are wet, with
the cabinet removed, or with attachments
not recommended by the manufacturer.
Disconnect the TV set from mains socket
and aerial during lightning storms.
Broken pieces:
Do not throw anything at the TV set. The
screen glass may break by the impact and
cause serious injury.
If the surface of the TV set cracks, do not
touch it until you have unplugged the
mains lead. Otherwise electric shock
may result.
When not in use
If you will not be using the TV set for
several days, the TV set should be
disconnected from the mains for
environmental and safety reasons.
As the TV set is not disconnected from
the mains when the TV set is just turned
off, pull the plug from the mains to
disconnect the TV set completely.
However, some TV sets may have
features that require the TV set to be left
in standby to work correctly.
Mounting Hook
Hook attachment on rear
of TV set
Screw (supplied with the
Wall-mount bracket)
8 mm - 12 mm
30 cm
10 cm 10 cm
10 cm
Leave at least this space around
the set.
30 cm
10 cm
10 cm
6 cm
Leave at least this space around
the set.
Air circulation is blocked.
Wall Wall
Continued
040SAF.fm Page 9 Monday, January 11, 2010 11:09 AM
W:\PRODUCCIO\OCTUBRE 2009\3892 AZ1N papel\4-168-148-11(0) UK
Reducido\040SAF.fm
masterpage:Left
10
GB
For children
Do not allow children to climb on the TV
set.
Keep small accessories out of the reach
of children, so that they are not
mistakenly swallowed.
If the following problems
occur...
Turn off the TV set and unplug the mains
lead immediately if any of the following
problems occur.
Ask your dealer or Sony service centre to
have it checked by qualified service
personnel.
When:
Mains lead is damaged.
Poor fitting of mains socket.
TV set is damaged by being dropped,
hit or having something thrown at it.
Any liquid or solid object falls through
openings in the cabinet.
Precautions
Viewing the TV
View the TV in moderate light, as
viewing the TV in poor light or during
long period of time, strains your eyes.
When using headphones, adjust the
volume so as to avoid excessive levels,
as hearing damage may result.
LCD Screen
Although the LCD screen is made with
high-precision technology and 99.99%
or more of the pixels are effective, black
dots may appear or bright points of light
(red, blue, or green) may appear
constantly on the LCD screen. This is a
structural property of the LCD screen
and is not a malfunction.
Do not push or scratch the front filter, or
place objects on top of this TV set. The
image may be uneven or the LCD screen
may be damaged.
If this TV set is used in a cold place, a
smear may occur in the picture or the
picture may become dark. This does not
indicate a failure. These phenomena
disappear as the temperature rises.
Ghosting may occur when still pictures
are displayed continuously. It may
disappear after a few moments.
The screen and cabinet get warm when
this TV set is in use. This is not a
malfunction.
The LCD screen contains a small amount
of liquid crystal. Some fluorescent tubes
used in this TV set also contain mercury.
Follow your local ordinances and
regulations for disposal.
Handling and cleaning the
screen surface/cabinet of
the TV set
Be sure to unplug the mains lead connected
to the TV set from mains socket before
cleaning.
To avoid material degradation or screen
coating degradation, observe the following
precautions.
To remove dust from the screen surface/
cabinet, wipe gently with a soft cloth. If
dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild
detergent solution.
Do not spray water or detergent directly
on the TV set. It may drip to the bottom
of the screen or exterior parts, and may
cause a malfunction.
Never use any type of abrasive pad,
alkaline/acid cleaner, scouring powder,
or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using
such materials or maintaining prolonged
contact with rubber or vinyl materials
may result in damage to the screen
surface and cabinet material.
Periodic vacuuming of the ventilation
openings is recommended to ensure to
proper ventilation.
When adjusting the angle of the TV set,
move it slowly so as to prevent the TV
set from moving or slipping off from its
table stand.
Optional Equipment
Keep optional components or any
equipment emitting electromagnetic
radiation away from the TV set.
Otherwise picture distortion and/or noisy
sound may occur.
This equipment has been tested and
found to comply with the limits set out in
the EMC Directive using a connection
signal cable shorter than 3 meters.
Batteries
Observe the correct polarity when
inserting batteries.
Do not use different types of batteries
together or mix old and new batteries.
Dispose of batteries in an
environmentally friendly way. Certain
regions may regulate the disposal of
batteries. Please consult your local
authority.
Handle the remote with care. Do not
drop or step on it, or spill liquid of any
kind onto it.
Do not place the remote in a location
near a heat source, a place subject to
direct sunlight, or a damp room.
Disposal of the TV set
Disposal of Old
Electrical &
Electronic
Equipment
(Applicable in
the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on its
packaging indicates that this product shall
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of
electrical and electronic equipment. By
ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the
environment and human health, which
could otherwise be caused by
inappropriate waste handling of this
product. The recycling of materials will
help to conserve natural resources. For
more detailed information about recycling
of this product, please contact your local
Civic Office, your household waste
disposal service or the shop where you
purchased the product.
Disposal of
waste batteries
(applicable in the
European Union
and other
European
countries with separate
collection systems)
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not be
treated as household waste. On certain
batteries this symbol might be used in
combination with a chemical symbol. The
chemical symbols for mercury (Hg) or lead
(Pb) are added if the battery contains more
than 0.0005% mercury or 0.004% lead. By
ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the
environment and human health which
could otherwise be caused by
inappropriate waste handling of the
battery. The recycling of the materials will
help to conserve natural resources. In case
of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery,
this battery should be replaced by qualified
service staff only. To ensure that the
battery will be treated properly, hand over
the product at end-of-life to the applicable
collection point for the recycling of
electrical and electronic equipment. For all
other batteries, please view the section on
how to remove the battery from the product
safely. Hand the battery over to the
applicable collection point for the
recycling of waste batteries. For more
detailed information about recycling of
this product or battery, please contact your
local Civic Office, your household waste
disposal service or the shop where you
purchased the product.
040SAF.fm Page 10 Thursday, November 19, 2009 4:04 PM
11
GB
W:\PRODUCCIO\ENERO 2010\4056 AZ1N RC\4-168-148-
13(1)\050OPT.fm
masterpage:Left
i-MANUAL
i-MANUAL
i-MANUAL
Displays the instruction manual on the screen.
Navigating through the Instruction Manual
1 Press i-MANUAL.
2 Press F/f to select topic from the Table of Contents, then press .
Use the corresponding coloured button to go to next or previous page and to return to Table of
Contents.
If the explanation is linked to other topic, the symbol will appear. Press F/f/G/g to select
then press . Press
RETURN to go back.
3 Press RETURN to exit.
~
The XMB™ (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the TV screen.
050OPT.fm Page 11 Thursday, February 11, 2010 2:15 PM
12
GB
Additional Information
Installing the Accessories (Wall-Mount Bracket)
To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Your TV can be installed using the Wall-Mount Bracket SU-WL500 (KDL-46EX4xx, KDL-
40BX4/EX4/EX6/NX5xx, KDL-37EX4xx, KDL-32BX3/BX4/EX3/EX4/EX6/NX5xx) / SU-
WL100 (KDL-26EX3xx, KDL-22EX3xx) (sold separately).
Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the
installation.
Refer to “Detaching the Table-Top Stand from the TV” (page 8).
~
Place the TV on the Table-Top Stand, when securing the Mounting Hook.
KDL-46EX4xx
KDL-40BX4/EX4/EX6/NX5xx
KDL-37EX4xx
KDL-32BX3/BX4/EX3/EX4/EX6/NX5xx
KDL-26EX3xx
KDL-22EX3xx
Screw
(+PSW6 × 16)
Mounting Hook
Square hole
Screw
(+PSW4 × 12)
Mounting Hook
Sufficient expertise is required for installing this product, especially to determine the strength of the wall for
withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers
or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any
damage or injury caused by mishandling or improper installation.
060ADD.fm Page 12 Tuesday, January 12, 2010 5:57 PM
13
GB
Additional Information
KDL-46EX4xx
KDL-40BX4/EX4/EX6/NX5xx
KDL-37EX4xx
KDL-32BX3/BX4/EX3/EX4/EX6/NX5xx
KDL-26EX3xx
KDL-22EX3xx
Unit: cm
Figures in the above table may differ slightly depending on the installation.
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of
the TV. Refer to “Specifications” (page 15) for its weight.
TV installation dimensions table
Model Name
Display dimensions
Screen centre
dimension
Length for each mounting angle
Angle (0) Angle (20)
AB C DEFGH
KDL-46EX4xx 112.7 67.4 8.4 42.4 16.2 36.9 64.0 46.4
KDL-40NX5xx 102.3 62.8 12.2 43.9 16.0 34.9 59.1 47.9
KDL-40BX4xx 99.6 59.8 12.2 42.5 15.9 34.1 56.6 46.2
KDL-40EX4xx 99.2 59.8 12.2 42.5 16.0 34.1 56.7 46.3
KDL-40EX6xx 95.2 58.1 13.3 43.1 12.0 29.7 54.6 45.4
KDL-37EX4xx 92.1 56.4 14.0 42.7 15.8 32.7 53.4 46.3
KDL-32NX5xx 82.5 51.7 17.2 43.2 15.6 30.9 48.8 47.1
KDL-32BX3/BX4xx 80.4 49.7 17.2 42.6 15.6 30.3 47.9 46.0
KDL-32EX3/EX4xx 80.0 49.7 17.2 42.6 15.7 30.3 47.0 46.1
KDL-32EX6xx 76.4 47.5 18.5 43.1 12.0 26.0 47.3 45.4
KDL-26EX3xx 67.2 42.3 9.7 31.5 16.0 26.2 40.2 32.3
KDL-22EX3xx 55.1 36.7 13.3 32.9 14.3 22.2 34.8 32.8
Screen centre point
Screen centre point
WARNING
060ADD.fm Page 13 Tuesday, January 12, 2010 5:57 PM
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony kdl 32nx500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sony kdl 32nx500

Sony kdl 32nx500 Bedienungsanleitung - Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch - 334 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info