Bedienungsanleitung Sony KDL-32V4720 (Seite 36 von 36) (Englisch)

57551

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Troubleshooting

Check whether the 1 (standby) indicator is

flashing in red.

When it is flashing

The self-diagnosis function is activated.

1 Count how many

1 (standby) indicator flashes

between each two second break.

For example, the indicator flashes three times, then

there is a two second break, followed by another

three flashes, etc.

2 Press 1 on the top edge of the TV to turn it off,

disconnect the mains lead, and inform your

dealer or Sony service centre of how the

indicator flashes (number of flashes).

When it is not flashing

1 Check the items in the tables below.

2 If the problem still persists, have your TV

serviced by qualified service personnel.

Picture

No picture (screen is dark) and no sound

• Check the aerial/cable connection.

• Connect the TV to the mains, and press 1 on the top edge

of the TV.

• If the 1 (standby) indicator lights up in red, press "/1.

No picture or no menu information from

equipment connected to the scart connector

• Press / to display the connected equipment list,

then select the desired input.

• Check the connection between the optional equipment

and the TV.

Double images or ghosting (only in analogue

mode)

• Check the aerial/cable connection.

• Check the aerial location and direction.

Only snow and noise appear on the screen (only

in analogue mode)

• Check if the aerial is broken or bent.

• Check if the aerial has reached the end of its serviceable

life (three to five years in normal use, one to two years at

the seaside).

Picture or sound noise when viewing a TV

channel (only in analogue mode)

• Adjust “AFT” (Automatic Fine Tuning) to obtain better

picture reception (page 28).

Some tiny black points and/or bright points

appear on the screen

• The picture of a display unit is composed of pixels. Tiny

black points and/or bright points (pixels) on the screen do

not indicate a malfunction.

No colour on programmes

• Select “Reset” (page 22).

No colour or irregular colour when viewing a

signal from the

/ COMPONENT IN sockets

• Check the connection of the

/ COMPONENT

IN sockets and check if each sockets are firmly seated in

their respective sockets.

Picture freezes or contains blocks on the screen

• Check signal level (page 31). If signal bar is red (no

signal) or amber (low signal), check the aerial/ cable

connection.

• Remove the connected USB device. It can be damaged or

not supported by the TV.

Check the website below for updated information about

compatible USB devices:

http://support.sony-europe.com/TV/compatibility/

Sound

No sound, but good picture

• Press 2 +/– or % (Mute).

• Check if the “Speaker” is set to “TV Speaker”

(page 27).

• When using HDMI input with Super Audio CD or DVD-

Audio, DIGITAL AUDIO OUT (OPTICAL) may not

output audio signals.

Channels

The desired channel cannot be selected

• Switch between digital and analogue mode and select the

desired digital/analogue channel.

Some channels are blank

• Scrambled/Subscription only channel. Subscribe to the

pay TV service.

• Channel is used only for data (no picture or sound).

• Contact the broadcaster for transmission details.

Digital channels are not displayed

• Contact a local installer to find out if digital transmissions

are provided in your area.

• Upgrade to a higher gain aerial.

General

Distorted picture and/or sound

• Keep the TV away from electrical noise sources such as

cars, motorcycles, hair-dryers or optical equipment.

• When installing optional equipment, leave some space

between the optional equipment and the TV.

• Check the aerial/cable connection.

• Keep the aerial/cable TV cable away from other

connecting cables.

The TV turns off automatically (the TV enters

standby mode)

• Check if the “Sleep Timer” is activated, or confirm the

“Duration” setting of “On Timer Settings” (page 25).

• If no signal is received and no operation is performed in

the TV mode for 10 minutes, the TV automatically

switches to standby mode.

The TV turns on automatically

• Check if the “On Timer” is activated (page 25).

Some input sources cannot be selected

• Select “AV Preset” and cancel “Skip” of the input source

(page 26).

The remote does not function

• Replace the batteries.

A channel cannot be added to the Favourite list

• Up to 999 channels can be stored in the Favourite list.

HDMI equipment does not appear on “HDMI

Device List”

• Check that your equipment is “Control for HDMI”

compatible equipment.

Not all channels are tuned

• Check support web site for cable provide information.

http://support.sony-europe.com/TV/DVBC/

You cannot select “Off” in “Control for HDMI”.

• If any “Control for HDMI” compatible audio equipment

is connected to the TV, you cannot select “Off” in this

menu. If you want to change the audio output to the TV

speaker, select “TV Speaker” in the “Speaker” menu

(page 27).

010COV.book Page 36 Tuesday, June 17, 2008 12:53 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-32V4720 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony KDL-32V4720

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info