Bedienungsanleitung Sony KDL-32V5500 (Seite 51 von 57) (Englisch)

68850

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

C:\Documents and Settings\All Users\Documentos\SONY TELES\00

MARTA_DTP IMDB\EX2L\4136111141\4136111141\100ADD.fm

masterpage:Left

KDL-52/46/40/37/32V5500

x-xxx-xxx-xx(x)

Additional Information

Troubleshooting

Check whether the 1 (standby) indicator is flashing in red.

When the 1 (standby) indicator is flashing

The self-diagnosis function is activated.

1 Count how many times the 1 (standby) indicator flashes between each two second break.

For example, the indicator may flash three times, go off for two seconds, then flash again three

times.

2 Press 1 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony

service centre of how the indicator flashes (number of flashes).

When the 1 (standby) indicator is not flashing

1 Check the items in the tables below.

2 If the problem persists, have your TV serviced by qualified service personnel.

Condition Explanation/Solution

Picture

There is no picture (screen is

dark) and no sound.

• Check the aerial/antenna/cable connection.

• Connect the TV to the mains/AC power, and press 1 on the TV.

• If the 1 (standby) indicator lights up in red, press "/1.

No picture or menu

information from equipment

connected to the scart

connector appears on the

screen.

• Press to display the list of inputs, then select the desired input.

• Check the connection between the optional equipment and the TV.

Ghosting occurs, or double

images appear.

• Check the aerial/antenna/cable connection.

• Check the aerial/antenna location and direction.

Only snow and noise appear

on the screen.

• Check if the aerial/antenna is broken or bent.

• Check if the aerial/antenna has reached the end of its serviceable life

(three to five years for normal use, one to two years when used at the

seaside).

There is picture or sound noise

when viewing a TV channel.

• Adjust “AFT” (Automatic Fine Tuning) to obtain better picture

reception (page 42).

Tiny black points and/or

bright points appear on the

screen.

• The screen is composed of pixels. Tiny black points and/or bright points

(pixels) on the screen do not indicate a malfunction.

The picture contours are

distorted.

• Select “Standard” or “Off” in “Motionflow” (page 35) (except for KDL-

52V55/56xx, 46V55/56xx, 40V55/56xx, 37V55/56xx, 32V55/56xx).

• Change the current setting of “Film Mode” to other settings (page 35).

The picture is not displayed in

colour.

• Select “Reset” (page 34).

The picture from equipment

connected to the

COMPONENT IN

sockets is not displayed in

colour, or is displayed in

irregular colours.

• Check the connection of the COMPONENT IN sockets and check if

the sockets are firmly seated in their respective sockets.

(Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-32V5500 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony KDL-32V5500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info