Bedienungsanleitung Sony KDL-32W4210 (Seite 26 von 71) (Englisch)

57513

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

Screen Settings

“Screen Format”: For details about the screen format, see “To change the

screen format manually to suit the broadcast” on page 14.

“Auto Format”: Automatically changes the screen format according to the

broadcast signal. To keep your setting, select “Off”.

“Display Area”: Adjusts the picture display area in 1080i/p and 720p sources

when "Screen Format" is set to "Wide".

• “Auto”: During digital broadcasts, displays pictures in accordance with the

settings recommended by the broadcast station.

• “Full Pixel”: Displays pictures in their original size.

• “Normal”: Displays pictures in their recommended size.

“Horizontal Shift”: Adjusts the horizontal position of the picture.

“Vertical Shift”: Adjusts the vertical position of the picture when “Screen

Format” is set to “Smart”, “Zoom” or “14:9”.

“Vertical Size”: Adjusts the vertical size of the picture when “Screen Format” is

set to “Smart”.

PC Settings

“Screen Format”: Selects a screen format for displaying input from your PC.

• “Full 1”: Enlarges the picture to fill the vertical display area, keeping its

original horizontal-to-vertical aspect ratio.

• “Full 2”: Enlarges the picture to fill the display area.

“Reset”: Resets the PC screen settings to the factory settings.

“Auto Adjustment”: Automatically adjusts the display position, phase and pitch

of the picture when the TV receives an input signal from the connected PC.

“Auto Adjustment” may not work well with certain input signals. In such cases,

manually adjust “Phase”, “Pitch” and “Horizontal Shift”.

“Phase”: Adjusts the phase when the screen flickers.

“Pitch”: Adjusts the pitch when the picture has unwanted vertical stripes.

“Horizontal Shift”: Adjusts the horizontal position of the picture.

“Power Management”: Switches the TV to standby mode if no signal is

received for 30 seconds in the PC input.

AV Set-up

“AV Preset”: Assigns a name to any equipment connected to the side and rear

sockets. The name will be displayed briefly on the screen when the equipment is

selected. You can skip an input source that is not connected to any equipment.

1 Press

F/f to select the desired input source, then press .

2 Press

F/f to select the desired option below, then press .

• -, CABLE, SAT, VCR, DVD/BD, GAME, AUDIO SYSTEM, CAM, PC: Uses one

of the preset labels to assign a name to connected equipment.

• “Edit:”: Creates your own label.

1 Press F/f to select the desired letter or number (“_” for a blank space),

then press

If you input a wrong character

Press G/g to select the wrong character. Then, press F/f to select the correct

character.

2 Repeat the procedure in step 1 until the name is completed.

3 Select “OK”, then press .

• “Skip”: Skips an input source that is not connected to any equipment when you

press F/f to select the input source.

“AV2 Input”: Sets a signal to be input through the socket labelled / /

AV2 on the rear of the TV.

• “Auto”: Switches automatically among the signals of RGB input, S video

input, Composite video input depending on the input signal.

• “RGB”: Inputs the RGB signal.

• “S Video”: Inputs the S Video signal.

• “Composite”: Inputs the Composite video signal.

010COV.book Page 26 Wednesday, March 26, 2008 2:49 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-32W4210 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony KDL-32W4210

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info