Bedienungsanleitung Sony KDL-32W42XX (Seite 27 von 211) (Polnisch)

43129

Zoom out

Zoom in

Vorherige Seite

1/211

Nächste Seite

Using MENU Functions

“AV2 Output”: Sets a signal to be output through the socket labelled /

/ AV2 on the rear of the TV. If you connect a VCR/ DVD recorder or

other recording equipment to the / / AV2 socket, you can then

record from the equipment connected to other sockets of the TV.

• “TV”: Outputs a broadcast.

• “Auto”: Outputs whatever is being viewed on the screen (except signals

from the HDMI IN 1, HDMI IN 2, HDMI IN 3, / COMPONENT

IN and / PC IN sockets).

“Speaker”: Turns on/off the TV’s internal speakers.

• “TV Speaker”: The TV speakers are turned on in order to listen to the TV’s

sound through the TV speakers.

• “Audio System”: The TV speakers are turned off in order to listen to the

TV’s sound only through your external audio equipment connected to the

audio output sockets. When connected with “Control for HDMI” compatible

equipment, you can turn the connected equipment on interlocked with the TV.

This setting must be made after connecting the equipment.

“Audio Out”:

• “Variable”: The audio output from your audio system can be controlled by

the TV’s remote.

• “Fixed”: The audio output of the TV is fixed. Use your audio receiver’s

volume control to adjust the volume (and other audio settings) through your

audio system.

“Audio Out” is not available for audio system connected to the TV using the HDMI

sockets.

HDMI Set-up

This is used to set the “Control for HDMI” compatible equipment connected to

the HDMI sockets. Note that the interlock setting must also be made on the

connected “Control for HDMI” compatible equipment side.

“Control for HDMI”: This sets whether to interlock the “Control for HDMI”

compatible equipment and the TV. When set to “On”, the following menu items

can be performed.

“Auto Devices Off”: When this is set to “On”, the “Control for HDMI”

compatible equipment turn on and off interlocked with the TV.

“Auto TV On”: When this is set to “On” and if the connected HDMI, control

compatible equipment is turned on, the TV automatically turns on, and the

displays the HDMI input from the connected equipment.

“Device List Update”: Creates or updates the “HDMI Device List”. Up to 14

“Control for HDMI” compatible equipment can be connected, and up to 4

equipment can be connected to a single socket. Be sure to update the “HDMI

Device List” when you change the “Control for HDMI” compatible equipment

connections or settings. Select them manually one by one until getting a correct

picture for several seconds.

“HDMI Device List”: Displays the connected “Control for HDMI” compatible

equipments.

Product Information

Displays your TV’s product information.

All Reset

Resets all settings to the factory settings and then displays the “Auto Start-up”

screen.

• Be sure not to turn the TV off during this period (it takes about 30 seconds) or press any

buttons.

• All settings, including Digital Favourite list, country/region, language, auto tuned

channels, etc. will be reset.

010COV.book Page 27 Friday, March 28, 2008 9:57 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-32W42XX Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony KDL-32W42XX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info