Bedienungsanleitung Sony KDL-37U4000 (Seite 18 von 31) (Englisch)

60739

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Using the Tools menu

Press TOOLS to display the following options

when viewing pictures from connected equipment.

To view two pictures simultaneously

– PIP (Picture in Picture)

You can view two pictures (PC input and TV

programme) on the screen simultaneously.

Connect a PC (page 16), and make sure that images

from a PC appear on the screen.

You cannot display resolutions higher than WXGA (1280

× 768 pixels).

1 Press TOOLS to display the Tools menu.

2 Press F/f to select “PIP”, then press .

The picture from the connected PC is displayed

with full size and the TV programme is displayed

on the right corner.

You can use

F/f/G/g to move the TV

programme screen position.

3 Press number buttons or PROG +/- to select

the TV channel.

To return to single picture mode

Press RETURN.

You can switch the audible picture by selecting “PC

Sound/TV Sound” from the Tools menu.

Using “Control for

HDMI”

The “Control for HDMI” function allows

equipment to control each other using HDMI CEC

(Consumer Electronics Control) specified by

HDMI.

You can perform interlocked control operations

between Sony “Control for HDMI” compatible

equipment such as a TV, DVD recorder with hard

disk and audio system by connecting the equipment

with HDMI cables.

Be sure to correctly connect and set the compatible

equipment to use the “Control for HDMI” function.

To connect the “Control for HDMI”

compatible equipment

Connect the compatible equipment and the TV with

an HDMI cable. When connecting an audio system,

in addition to the HDMI cable, be sure to also

connect the audio output socket

of the TV and

the audio system. For details, see page 16.

To make the “Control for HDMI” settings

“Control for HDMI” must be set on both the TV

side and the connected equipment side. See HDMI

Set-up (page 24) for the TV side settings. See the

operating instructions of the connected equipment

for setting details.

“Control for HDMI” functions

• Turns the connected equipment off interlocked

with the TV.

• Turns the TV on interlocked with the connected

equipment and automatically switches the input

to the equipment when the equipment starts to

play.

• If you turn on a connected audio system while the

TV is on, the input switches to the audio from the

audio system.

• Adjusts the volume and mutes the sound of a

connected audio system.

Options Description

Close Closes the Tools menu.

Picture Mode (except

PC input mode)

See page 20.

Display Mode (in PC

input mode only)

See page 20.

Sound Effect See page 21.

Speaker See page 21.

PIP (in PC input

mode only)

See page 18.

H Centre (in PC input

mode only)

See page 22.

V Lines (in PC input

mode only)

See page 22.

Sleep Timer (except

PC input mode)

See page 23.

Power Saving See page 22.

010COV.book Page 18 Friday, July 4, 2008 12:56 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-37U4000 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony KDL-37U4000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info