Bedienungsanleitung Sony KDL-40E5500 (Seite 52 von 57) (Englisch)

106391

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

C:\Documents and Settings\All Users\Documentos\SONY TELES\00

MARTA_DTP IMDB\EX2L\4136111141\4136111141\100ADD.fm

masterpage:Left

KDL-52/46/40/37/32V5500

x-xxx-xxx-xx(x)

No picture from the connected

equipment appears on the

screen.

• Turn the connected equipment on.

• Check the cable connection.

• Press to display the list of inputs, then select the desired input.

• Correctly insert the memory card or other storage device in the digital

still camera.

• Use a digital still camera memory card or other storage device that has

been formatted according to the instruction manual supplied with the

digital still camera.

• Operations are not guaranteed for all USB devices. Also, operations

differ depending on the features of the USB device and the video being

played.

You cannot select the

connected equipment on the

Home Menu or you cannot

switch the input.

• Check the cable connection.

• Set the server to be displayed on the Home Menu (page 31).

Sound

The picture is good, but there

is no sound.

• Press 2 +/– or % (Mute).

• Check if the “Speaker” is set to “TV Speaker” (page 38).

• When using HDMI input with Super Audio CD or DVD-Audio,

DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.

Channels

You cannot select your

desired channel.

• Switch between digital and analogue mode, and select the desired

digital/analogue channel.

Some channels are blank. • The channel is for scrambled/subscription service only. Subscribe to a

pay TV service.

• The channel is used only for data (no picture or sound).

• Contact the broadcaster for transmission details.

You cannot view digital

channels.

• Contact a local installer to find out if digital transmissions are provided

in your area.

• Upgrade to a higher gain aerial/antenna.

Home Network

Connection diagnostic results

indicate a failure.

Check Connections

• Use a straight cable for the LAN cable.

• Check if the cable is connected firmly.

• Check the connection between the TV and the router.

Check Settings

• Change the IP address for the DNS server (“Checking the Network

Connection” (page 31)) while referring to the following.

–Contact your Internet service provider.

–Specify the IP address of the router if you do not know the DNS of

your Internet service provider.

The server cannot be found, a

list cannot be retrieved, and

playback fails.

• Once server settings are changed, turn the TV off and on by pressing 1

on the TV.

• Execute “Server Diagnostics” (page 31).

When using a PC as the server

• Check if the PC is turned on. Do not turn off the PC while accessing.

• If security software is installed on the PC, be sure to allow connections

from external devices. For details, refer to the manual supplied with your

security software.

• The load on the PC may be too high or the server application may

become unstable. Try the following:

–Stop the server application and restart it.

–Restart the PC.

–Reduce the number of applications running on the PC.

–Reduce the amount of content.

Condition Explanation/Solution

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-40E5500 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony KDL-40E5500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info