Bedienungsanleitung Sony KDL-40EX728 (Seite 23 von 36) (Englisch)

460934

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Network Setup

Setting up the Internet

connection

Using the network feature you can connect the

TV to the Internet. The set-up procedure

differs depending on the type of network and

LAN router. Before setting up the Internet

connection, be sure to set up a LAN router.

Check your wireless LAN environment using

the following chart.

Wireless LAN

Wired LAN

, Type 4

* Type 1 is easier to set up if your router has an

automatic setting button, e.g. Air Station One-

Touch Secure System (AOSS). Most of the latest

routers have this function. Check your router.

Type 1: Follow the configuration for “Secured

Network with Wi-Fi Protected Set-up (WPS)”.

Type 2: Follow the configuration for “Secured

Network without Wi-Fi Protected Set-up

(WPS)”.

Type 3: Follow the configuration for

“Unsecured Network with Any Type of

Wireless LAN Router”.

Type 4: Follow the configuration for “Wired

network set-up”.

Type 1: Secured network with

Wi-Fi Protected Set-up (WPS)

The WPS standard makes security of a wireless

home network as straightforward as pressing

the WPS button on the wireless LAN router.

Before setting up a wireless LAN, check the

location of the WPS button on the router and

verify how to use it.

For security purpose, “WPS (PIN)” provides a

PIN code for your router. PIN code is renewed

every time you select “WPS (PIN)”.

1 Press HOME, then select >

“Network” > “Network Set-up”.

2 Select “Wireless Set-up”.

3 Select “WPS (Push Button)” for Push

Button method or “WPS (PIN)” for

PIN method.

• Button name of the WPS may differ

depending on the router (e.g. AOSS button).

4 Follow the instructions on the set-up

screen.

Type 2: Secured network

without Wi-Fi Protected Set-up

(WPS)

To set up a wireless LAN, SSID (wireless

network name) and security key (WEP or

WPA key) will be required. If you do not know

them, consult the instruction manual of your

router.

1 Press HOME, then select >

“Network” > “Network Set-up”.

2 Select “Wireless Set-up”.

3 Select “Scan”, then select a network

from the list of scanned wireless

networks.

4 Follow the instructions on the set-up

screen.

• If you use WPS for network set-up, the security

settings of the wireless LAN router activate, and

any equipment previously connected to the

wireless LAN in a non-secure status will be

disconnected from the network.

In this case, activate the security settings of the

disconnected equipment and then reconnect. Or,

you can deactivate the security settings of the

wireless LAN router, and then connect the

equipment to a TV in a non-secure status.

Secure Wireless LAN? NO

Type 3

YES m

Do you use a wireless LAN

router compatible with Wi-Fi

Protected Set-up (WPS)?

Type 2

YES m

Type 1*

(Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-40EX728 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info