Bedienungsanleitung Sony KDL-40R455C (Seite 10 von 40) (Englisch)

651471

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

D:\SONY TV\SY140226_SE2_SE2N_EU_IM (GB+ML 28)\4562100111_GB\040WAT.fm masterpage: Left

KDL-48R55xC/40R55xC/40R45xC/32R50xC/32R40xC

4-562-100-11(1)

Setting up the Internet

Connection

Using the network feature you can connect the

TV to the Internet. The set-up procedure differs

depending on the type of network and LAN

router. Before setting up the Internet

connection, be sure to set up a LAN router.

Check your wireless LAN environment using the

following chart.

Wireless LAN

* Type 1 is easier to set up if your router has an

automatic setting button, e.g. Air Station One-Touch

Secure System (AOSS). Most of the latest routers have

this function. Check your router.

Type 1: Follow the configuration for Secured

network with Wi-Fi Protected Setup™

(WPS).

Type 2: Follow the configuration for Secured

network without Wi-Fi Protected

Setup™ (WPS).

Type 3: Follow the configuration for Unsecured

network with any type of wireless

LAN router.

Type 4: Follow the configuration for Wired

network set-up.

The WPS standard makes security of a wireless

home network as straightforward as pressing

the WPS button on the wireless LAN router.

Before setting up a wireless LAN, check the

location of the WPS button on the router and

verify how to use it.

For security purpose, [WPS (PIN)] provides a PIN

code for your router. PIN code is renewed every

time you select [WPS (PIN)].

1 Press HOME, then select [Settings] 

[System Settings]  [Set-up] 

[Network]  [Network Set-up].

2 IP Address setting/Proxy server:

– automatic setting:

[Set up network connection]  [Easy]

– manual setting:

[Set up network connection]  [Expert] 

[Wireless Set-up]

3 Select [WPS (Push Button)] for Push

Button method or [WPS (PIN)] for PIN

method.

Note

Button name of the WPS may differ depending on

the router (e.g. AOSS button).

4 Follow the instructions on the set-up

screen.

Note

• If you use WPS for network set-up, the security

settings of the wireless LAN router activate, and any

equipment previously connected to the wireless LAN

in a non-secure status will be disconnected from the

network.

In this case, activate the security settings of the

disconnected equipment and then reconnect. Or, you

can deactivate the security settings of the wireless

LAN router, and then connect the equipment to a TV

in a non-secure status.

• To use the network with IPv6, select [Settings] 

[System Settings]  [Set-up]  [Network]  [IPv6/

IPv4 Priority]  [IPv6], then select [Easy] in [Set up

network connection].

• When IPv6 is selected, HTTP Proxy cannot be set.

Connection TV to the Internet

(except KDL-40R45xC, KDL-32R40xC)

Secure Wireless LAN? NO

k Type 3

YES m

Do you use a wireless LAN

router compatible with Wi-Fi

Protected Setup™ (WPS)?

k Type 2

YES m

Type 1*

Wired LAN , Type 4

Type 1: Secured network with Wi-Fi

Protected Setup™ (WPS)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-40R455C Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony KDL-40R455C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info