Bedienungsanleitung Sony KDL-40T35XX (Seite 39 von 41) (Englisch)

44064

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

KDL-46/40T35xx

2-697-124-12(1)

Additional Information

Troubleshooting

Check whether the 1 (standby) indicator is flashing in red.

When it is flashing

The self-diagnosis function is activated.

1 Count how many 1 (standby) indicator flashes between each two second break.

For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc.

2 Press 1 on the TV (Top side) to switch it off, disconnect the mains lead, and inform your dealer or

Sony service centre of how the indicator flashes (number of flashes).

When it is not flashing

1 Check the items in the tables below.

2 If the problem still persists, have your TV serviced by qualified service personnel.

Picture

Problem Cause/Remedy

No picture (screen is dark) and

no sound

• Check the aerial connection.

• Connect the TV to the mains, and press 1 on the TV (top side).

•If the 1 (standby) indicator lights up in red, press "/1.

No picture or no menu

information from equipment

connected to the scart

connector

• Check that the optional equipment is on and press / repeatedly until

the correct input symbol is displayed on the screen.

• Check the connection between the optional equipment and the TV.

Double images or ghosting

• Check aerial/cable connections.

• Check the aerial location and direction.

Only snow and noise appear

on the screen

• Check if the aerial is broken or bent.

• Check if the aerial has reached the end of its serviceable life (three to five

years in normal use, one to two years at the seaside).

Distorted picture (dotted lines

or stripes)

• Keep the TV away from electrical noise sources such as cars, motorcycles,

hair-dryers or optical equipment.

• When installing optional equipment, leave some space between the optional

equipment and the TV.

• Make sure that the aerial is connected using the supplied coaxial cable.

• Keep the aerial cable away from other connecting cables.

Picture noise when viewing a

TV channel

• Select “Manual Programme Preset” in the “Analogue Set-up” menu and

adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception

(page 30).

Some tiny black points and/or

bright points on the screen

• The picture of a display unit is composed of pixels. Tiny black points and/or

bright points (pixels) on the screen do not indicate a malfunction.

No colour on programmes

• Select “Reset” in the “Picture” menu to return to the factory settings

(page 20).

No colour or irregular colour

when viewing a signal from the

Y, P

B/CB, PR/CR jacks of 3

• Check the connection of the Y, PB/CB, PR/CR jacks of 3.

• Make sure that the Y, P

B/CB, PR/CR jacks of 3 are firmly seated in their

respective sockets.

Continued

010COV.book Page 39 Wednesday, August 29, 2007 11:22 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-40T35XX Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony KDL-40T35XX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info