Bedienungsanleitung Sony KDL-40W5500 (Seite 40 von 57) (Englisch)

68848

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

C:\Documents and Settings\All Users\Documentos\SONY TELES\00

MARTA_DTP IMDB\EX2L\4136111141\4136111141\090MEN.fm

masterpage:Left

KDL-52/46/40/37/32V5500

x-xxx-xxx-xx(x)

HDMI Set-up Allows the TV to communicate with equipment that is compatible with the Control

for HDMI function, and connected to the HDMI sockets/jacks of the TV. Note that

communication settings must also be made on the connected equipment.

Control for HDMI Sets whether or not to link the operations of the TV and the

connected equipment that is compatible with Control for

HDMI. When set to “On”, the following functions are

available.

If the specific Sony equipment that is compatible with

Control for HDMI is connected, this setting is applied to the

connected equipment automatically when the “Control for

HDMI” is set to “On” using the TV.

Auto Devices Off When this is set to “On”, the connected equipment that is

compatible with Control for HDMI turns off when you turn

off the TV.

Auto TV On When this is set to “On”, the TV turns on when you turn on

the connected equipment that is compatible with Control for

HDMI.

Tuner Box

Control

If set to “Advanced”, you can select a channel tuned by

connected equipment using the TV’s remote.

HDMI Device List Displays a list of connected equipment that is compatible

with Control for HDMI.

• You cannot use “Control for HDMI” if the TV operations are linked to the

operations of an audio system that is compatible with Control for HDMI.

Auto Start-up You can run the initial Set-up that appeared when you first connected the TV, and

select the language and country/area, or tune in all available channels again.

Even if you have made the settings when you first connected the TV, you may

need to change the settings after moving house, or to search for newly launched

channels.

Language Sets the language displayed on the menu screens.

Product Information Displays product information of the TV.

Factory Settings Resets all settings to factory settings except for the "Favourite" settings and

programme preset data. After completing this process, the initial set-up screen is

displayed. Completing auto tuning in initial set-up will reset the settings that are

not reset by "Factory Settings". To retain the settings, skip the "Auto Tuning".

Analogue Set-up

Programme List

Display

Select “Off” to hide the list of analogue channels from the XMB™

(XrossMediaBar).

1 Digit Direct When “1 Digit Direct” is set to “On”, you can select an analogue channel using one

preset number button (0 – 9) on the remote.

• When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and

above by entering two digits on the remote.

Favourite Set-up Adds channels in a Favourite list.

To reset the favourite channels, select “– – –”.

Auto Tuning Tunes in all the available analogue channels.

You can retune the TV after moving house, or to search for newly launched

channels.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-40W5500 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony KDL-40W5500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info