Bedienungsanleitung Sony KDL-52W40XX (Seite 24 von 211) (Polnisch)

43115

Zoom out

Zoom in

Vorherige Seite

1/211

Nächste Seite

“Sound Effect”, “Treble”, “Bass”, “Balance” and “Auto Volume” are not available when “Speaker” is set to “Audio System”.

Dual Sound

Selects the sound from the speaker for a stereo or bilingual broadcast.

“Stereo/ Mono”: For a stereo broadcast.

“A/ B/ Mono”: For a bilingual broadcast, select “A” for sound channel 1, “B”

for sound channel 2, or “Mono” for a mono channel, if available.

If you select other equipment connected to the TV, set “Dual Sound” to

“Stereo”, “A” or “B”.

Features

Quick Start

The TV turns on faster than usual within two hours after switching to standby

mode. However, power consumption in standby mode is higher than usual.

Power Saving

Selects the power saving mode to reduce the power consumption of the TV.

When “Picture Off” is selected, the picture is switched off and the (Picture

Off) indicator on the TV front panel lights up in green. The sound remains

unchanged.

“Standard Power”: Default settings.

“Reduced Power”: Reduces the power consumption of the TV.

“Picture Off”: Switches off the picture. You can listen to the sound with the

picture off.

Light Sensor

“On”: Automatically optimises the picture settings according to the ambient

light in the room.

“Off”: Turns off the “Light Sensor” feature.

Be sure not to put anything over the sensor, as its function may be affected. See

page 12 for the location of the light sensor.

Logo Illumination

(except for

KDL-37V4xxx,

KDL-32V4xxx,

KDL-26V4xxx)

Lights up and turns off the Sony logo on the front of the TV.

Film Mode

Provides an improved picture quality which is optimized for film when playing

DVD images taken on film and non progressive (interlaced).

“Auto”: Detects the picture contents (video or film) and optimizes the picture

quality. Use this setting for standard use.

“Off”: Turns off the “Film Mode” feature.

• If the image contains irregular signals or too much noise, “Film Mode” will be

automatically turned off even if “Auto” is selected.

•“Film Mode” is not available when “Video/ Photo” is set to “Photo” or when

photograph is detected if “Video-A” is set.

Video/Photo

Provides suitable image quality by selecting the option depending on the input

source (video or photograph data).

“Video-A”: Sets suitable image quality, depending on the input source, video

data or photograph data when directly connecting Sony HDMI output-capable

equipment that supports “Video-A” mode.

“Video”: Produces suitable image quality for moving pictures.

“Photo”: Produces suitable image quality for still images.

• The setting is fixed to “Video” when Video-A mode is not supported on the

connected equipment, even if “Video-A” is selected.

• Only available for HDMI 1, HDMI 2, HDMI 3 and Component in format 1080i

or 1080p.

010COV.book Page 24 Friday, March 28, 2008 9:57 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-52W40XX Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony KDL-52W40XX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info