Bedienungsanleitung Sony KDL-V32A12U (Seite 37 von 43) (Englisch)

45110

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

KDL-V32/40A12U

2-629-164-14(1)

Using Optional Equipment

Programming the

remote

This remote is preset to operate Sony TVs, most Sony

DVDs, VCRs and AUX systems (DAV, DTT

Receiver, Home Theatre, etc.).

To control VCRs and DVDs of other manufactures

(and some other Sony VCR, DVD and AUX models),

do the following procedure to programme the remote.

Note

Before you start, look up the three-digit code for your brand

of DVD, VCR or AUX system from the “Manufacturer’s

codes” on page 38.

1 To programme VCR or DVD:

Press and hold for about six seconds

until the green VCR and DVD lights flash.

To programme Sony AUX systems:

Press and hold for about six seconds

until the green AUX light flashes.

2 While the relevant lights are flashing, press

the number buttons to enter all three-digits

of the code for your brand of equipment

(page 38).

The green light is lit momentarily.

3 Turn on your equipment and check that the

following main functions work.

N (playback), x (stop), m (rewind), M (fast

forward) channel selection for both VCR and

DVDs, MENU and M/m/</, buttons only for

DVDs.

To connect Do this

DVD player with

component output

Connect to the component sockets

and the audio sockets / 4.

The component signal containing

576p signal format and audio

signal are input from the DVD

player.

Digital satellite

receiver or DVD

player F

Connect to the HDMI IN 5 socket

if the equipment has a HDMI

socket. The digital video and audio

signals are input from the digital

satellite receiver. If the equipment

has a DVI socket but not an HDMI

socket, connect the DVI socket to

the HDMI IN 5 socket through a

DVI - HDMI adaptor interface (not

supplied), and connect the

equipment’s audio out sockets to

the audio in HDMI IN 5 sockets.

The digital video and analogue

audio signals are input from the

equipment.

“PlayStation 2”,

DVD player or

decoder G

Connect to the scart socket /

1. When you connect the

decoder, the scrambled signal from

the TV tuner is output to the

decoder, then the unscrambled

signal is output from the decoder.

In this case, it will be properly

unscrambled if you set “AV2

Output” to “TV Analog”

(page 26).

DVD recorder or

VCR that supports

SmartLink H

Connect to the scart socket /

2. SmartLink is a direct link

between the TV and a VCR/DVD

recorder. For more information on

SmartLink, refer to the instruction

manual supplied with your VCR or

DVD recorder.

VCR I For details, see page 11.

Hi-Fi audio

equipment J

Connect to the audio output

sockets to listen to the sound

from the TV on Hi-Fi audio

equipment. To turn off the sound

of the TV speakers, set “Speaker”

to “Off” (page 26).

4 5 6

7 8

DIGITAL ANALOG

1 2 3

AUX/VIDEO

MODE

Continued

01GB-KLV40XUK.book Page 37 Wednesday, August 31, 2005 4:42 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-V32A12U Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info