Bedienungsanleitung Sony KDL-V40A11E (Seite 16 von 192) (Deutsch, Englisch, Französisch, Spanisch, Spanisch)

45100

Zoom out

Zoom in

Vorherige Seite

1/192

Nächste Seite

To access Text

Press /. Each time you press /, the display changes

cyclically as follows:

Text t Text over the TV picture (mix mode) t No

Text (exit the Text service)

To select a page, press the number buttons or PROG

+/-.

To hold a page, press / .

To reveal hidden information, press / .

Tips

• Ensure that the TV is receiving a good signal, or some text

errors may occur.

• Most TV channels broadcast a Text service. For

information on the use of the service, select the index page

(usually page 100).

• When four coloured items appear at the bottom of the Text

page, Fastext is available. Fastext allows you to access

pages quickly and easily. Press the corresponding

coloured button to access the page.

To access NexTView (depending on

availability of service)

NexTView is an electronic programme guide.

1 When a channel which provides a

NexTView service is selected (“NexTView”

is displayed as soon as the data is

available), press .

2 Press M/m/</, to select the displayed

option, then press OK to confirm.

To turn off NexTView, press again.

1 (All)/ (Entertainment)/ (Children)/

(Art)/ (Sports)/ (News)/ (Movies)/

(Music):

Lists programmes by category.

2 (Only when more than eight channels provide

NexTView):

Creates a channel list. You can store up to eight

channels. To restore the factory setting channels,

select “Auto B”.

3 :

Shows a reminder list (for details, see “5 Info:”).

4 Programmes:

Displays the programme list by time when the TV

receives 50% or less of the NexTView data

(“NexTView” is displayed in orange when a channel

is selected), and displays the programme list by time

and channel when the TV receives more than 50% of

the NexTView data (“NexTView” is displayed in

black when a channel is selected). The percentage

may differ depending on your area.

5 Info:

Displays programme description.

To record the programme (only VCRs which support

SmartLink and Timer Programming features), press

the red button.

To display a reminder message when the programme

is broadcast, press the green button. You can set up

to five programmes.

Notes

• Wrong characters appear on the screen if the language

used in the NexTView does not match the language set on

your TV. Set “Language” to the language used in the

NexTView (page 31). Also set “Country” to the country/

region from which the NexTView programme is broadcast

(page 31).

• “Record” and “Remind” are not available once the

programme has started.

Return to the

previous channel

watched (for more

than five seconds)

Press .

Access the

Programme index

table (in analogue

mode only)

Press OK. To select an analogue

channel, press M/m, then press

OK.

To access the Input signal index

table, see page 21.

To Do this

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-V40A11E Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony KDL-V40A11E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info