Bedienungsanleitung Sony KDL-V40A12U (Seite 40 von 43) (Englisch)

45108

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

KDL-V32/40A12U

2-629-164-14(1)

Troubleshooting

Check whether the 1 (standby) indicator is flashing in red.

When it is flashing

The self-diagnosis function is activated.

1 Count how many 1 (standby) indicator flashes between each two second break.

For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc.

2 Press 1 on the TV (right side) to switch it off, disconnect the mains lead, and inform your dealer or

Sony service centre of how the indicator flashes (number of flashes).

When it is not flashing

1 Check the items in the tables below.

2 If the problem still persists, have your TV serviced by qualified service personnel.

Picture

Problem Cause/Remedy

No picture (screen is dark) and

no sound

• Check the aerial connection.

• Connect the TV to the mains, and press 1 on the TV (right side).

• If the 1 (standby) indicator lights up in red, press TV "/1.

No picture or no menu

information from equipment

connected to the scart

connector

• Check that the optional equipment is on and press / repeatedly until

the correct input symbol is displayed on the screen.

• Check the connection between the optional equipment and the TV.

Distorted picture

• Check if any connected optional equipment is installed in front of the TV or

beside the TV. When installing optional equipment, leave some space

between the optional equipment and the TV.

• When changing programmes or selecting digital/analogue Text, turn off any

equipment connected to the scart connector on the rear of the TV.

Double images or ghosting

• Check aerial/cable connections.

• Check the aerial location and direction.

Only snow and noise appear

on the screen

• Check if the aerial is broken or bent.

• Check if the aerial has reached the end of its serviceable life (three to five

years in normal use, one to two years at the seaside).

Picture (dotted lines or stripes)

noise

• Keep the TV away from electrical noise sources such as cars, motorcycles,

or hair-dryers.

• Make sure that the aerial is connected using the supplied coaxial cable.

• Keep the aerial cable away from other connecting cables.

• Do not use a 300-ohm twin lead cable as interference may occur.

Picture noise when viewing a

TV channel

• Select “Manual Programme Preset” in the “Set Up” menu and adjust “AFT”

(Automatic Fine Tuning) to obtain better picture reception (page 31).

• Select “Noise Reduction” in the “Picture Adjustment” menu to reduce the

noise in the picture (page 22).

Stripe noise during playback/

recording of a VCR

• Video head interference. Keep your VCR away from the TV.

• Leave a space of 30 cm between your VCR and the TV to avoid noise.

• Avoid installing your VCR in front of the TV or beside the TV.

Some tiny black points and/or

bright points on the screen

• The picture of a display unit is composed of pixels. Tiny black points and/or

bright points (pixels) on the screen do not indicate a malfunction.

01GB-KLV40XUK.book Page 40 Wednesday, August 31, 2005 4:42 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KDL-V40A12U Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info