Bedienungsanleitung Sony ke-42ts2 (Seite 5 von 135) (Deutsch, Englisch, Französisch)

140032

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

Safety Information

Additional Safety Information

• This set should only be moved by two or

more people. If the set needs to be

transported, it should be protected to insure

that it is not subject to shock, vibration or

excessive force.

• The slots and openings in the cabinet and in

the back and bottom are provided for the

necessary ventilation. To ensure reliable

operation of the set, and to protect it from

overheating, these slots and openings must

never be blocked or covered.

• After transporting the set directly from a cold

to a warm location, or if the room

temperature has changed suddenly, pictures

may be blurred or show poor colour over

portions of the picture. This is because

moisture has condensed on the mirrors or

lenses inside the set. Let the moisture

evaporate before using the set.

• To obtain a clear picture, do not expose the

screen to direct illumination or direct

sunlight. If possible, use spot lighting

directed down from the ceiling.

• The screen of this display unit has an anti-

reflection screen coating. To avoid screen

degradation, follow the points mentioned

below. Do not push on or scratch with hard

objects, or throw anything at the screen. The

screen may be damaged.

– Be sure to unplug the mains lead connected

to the media receiver unit from the mains

before cleaning.

– Do not touch the display panel after

operating continuously for along period as

the display panel becomes hot.

– The screen of this display unit has an anti-

reflection screen coating. We recommend

that the screen surface is touched as little as

possible.

– Clean the screen with the supplied cleaning

cloth or a soft cloth lightly moistened with

a mild detergent solution.

– Never use any type of abrasive pad,

scouring powder, or solvent, such as

alcohol or benzine. This type of contact may

result in damage to the screen surface.

• The TV set is not disconnected from the

mains when the switch is in Off position. To

disconnect completely the set, pull the plug

from the mains.

•

Note on use in highlands

When used at an altitude of greater than 1900

m or 6248 feet (air pressure less than 800hPa),

this Plasma Display Panel may generate a

low buzzing sound as a result of the

difference between the interior and exterior

air pressure of the panels. This is not

considered a defect and is not covered by the

Sony Warranty. This buzzing sound is an

inherent characteristic of any Plasma display

Panel.

Corrosion

Use of this set near the seashore may subject the

set to excessive salt, corrosion and internal

damage and result in deterioration of the set’s

performance. If the set will be subjected to any

of these conditions, steps should be taken to

reduce the humidity and temperature of the

area where the set is located.

On image retention

• If the following images are displayed for an

extended period time, image retention

(afterimage) in areas of the screen may result

due to the characteristics of the Plasma

Display Panel.

– Black bars at the top and bottom that

appear with a wide video source (Letterbox

picture).

– Black bars to the left and right that appear

with a 4:3 video source (conventional TV

broadcasts).

– Video game sources

– PC images

– DVD on-screen menu displays

– On-screen menus, channel numbers, etc., of

connected equipment such as Set top box,

Cable modem, VCR, etc.

The risk of this is higher if the set is in “Live”

mode or has a high contrast setting. This

image cannot be removed once burnt onto

the screen. To avoid the risk of image

retention do not leave the TV set operating on

such a picture, or programme for a long time,

use the “Screen Saver” function or lower the

contrast setting. Repeated extended daily

usage of the same image, or programme can

also result in this occurrence. IMAGE

RETENTION IS NOT COVERED BY THE

SONY WARRANTY.

• To reduce image retention, this TV set has the

“Screen Saver” function. The default setting

of the “Orbit” function in “Screen Saver” is

“On.”

• The “Screen Saver” function prevents and

reduces image retention.

• With extensive use of this TV set in 4:3 mode,

the 4:3 screen area might become darker

within a 16:9 panel. To avoid this problem,

the “Smart” picture mode should be used.

Checking the Accessories Supplied

See page 32.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony ke-42ts2 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info