Bedienungsanleitung Sony kf-42sx200 (Seite 19 von 251) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Türkisch)

140211

Zoom out

Zoom in

Vorherige Seite

1/251

Nächste Seite

Menu System

With this feature you can:

a) Individually attenuate the strength of a channel signal in case there is a strong local aerial signal (characteristically a striped

picture).

b) Individually adjust the volume level of each channel.

c) Normally the automatic fine tuning (AFT) will operating, however you can manually fine-tune the TV to obtain better

reception if the picture is distorted.

d) Preset the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way

a connected VCR records the unscrambled signal.

Using the "Further Programme Preset" function

1 Press the button on the remote control to display the menu

on the screen.

2 Push the joystick to select the symbol, then push to enter the

Set Up menu.

3 Push the joystick or to select Manual Set Up then push to

to enter.

4 Push the joystick or to select Further Programme Preset,

then push to to enter.

5 Push the joystick or to select the relevant programme number,

then push repeatedly to select:

a) ATT (RF attenuator)

b) VOL (Volume Offset)

c) AFT (Automatic Fine Tuning) or

d) DECODER

6 a) ATT

Push the joystick to select On, then press the button.

Repeat steps 5 and 6 a) to attenuate other channels.

b)VOL

Push the joystick or to adjust the volume level of the channel

over a range of -7 to +7, then press the button. Repeat steps 5

and 6b) to adjust the volume level of the other channels.

c) AFT

Push the joystick or to fine tune the channel frequency over

a range of -15 to +15, then press the button. Repeat steps 5 and

6c) if you wish to fine tune other channels.

d)DECODER

Push the joystick or to select AV1 (for a decoder connected

to the Scart :1/ 1) or AV3 (for a decoder connected to the

Scart :3/q 3 (SMARTLINK)), then press the button.

Repeat steps 5 and 6d) to select the AV1 or AV3 output for other

programme positions.

The picture from the decoder connected to the Scart connector

:1/ 1 or :3/q 3 (SMARTLINK) on the back of the

set will appear on the selected programme number.

7 Press the button to exit and return to the normal TV screen.

The TV set is now ready for use.

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Colour Tone

Personal

Off

Normal

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Start Auto Tuning

Start

- - - - - - -

Enter:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:



- - - - - - -

Manual Set Up

Select: Enter:

Language/Country

Manual Programme Preset

Further Programme Preset

RGB Set Up

Personal ID

Demo



- - - - - - -

Further Programme Preset

Select: Enter:

PROG AFTVOLATT DECODER

On

Off

Off

0

Off

Off

1

2

3

4

5

6

7

8

9

10



PROG AFTVOLATT DECODER

1 Off



PROG AFTVOLATT DECODER

1 On -5

2





PROG AFTVOLATT DECODER

1 On -5 2

Off

AV1

AV2



PROG AFTVOLATT DECODER

1On

- 5



01GBKF50/42SX200.fm Page 20 Tuesday, January 7, 2003 9:58 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony kf-42sx200 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info