Bedienungsanleitung Sony KLV155SR1 (Seite 47 von 52) (Englisch)

34050

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Additional Information

Problem Possible remedies

No picture.

Cannot receive any channels.

Cannot receive upper

channels (UHF) when using

an antenna.

TV is locked to one channel.

Cannot receive any channels

when using cable TV.

Cannot receive or select

channels.

The TV turns off

automatically.

(The TV enters the standby

mode.)

Some video sources do not

appear.

• Make sure the power cord is connected securely.

• Turn on the power of the TV.

• Check antenna/cable connections.

• Set “Cable” to “Off” in the

(Channel) menu (page 20).

• Perform Auto Program to add receivable channels that are not presently in the TV’s

memory (page 20).

• Perform Auto Program to add receivable channels that are not presently in the TV’s

memory (page 20).

• Check your Channel Fix setting (page 21).

• Perform Auto Program to add receivable channels that are not presently in the TV’s

memory (page 20).

• Make sure “Cable” in the

(Channel) menu is set to “On” (page 20).

• Perform Auto Program to add receivable channels that are not presently in the TV’s

memory (page 20).

• This TV automatically changes to the standby mode after displaying the message “TV will

turn off soon” if it receives no broadcast or input signal through the connected equipment

for 10 minutes.

• Check that the Sleep timer is activated (page 46).

• Check the connection between the optional video equipment and the TV.

• Press TV/VIDEO on the remote control (page 27).

• If you connect the video equipment to the S VIDEO input of the TV, set “Auto YC” to

“On” in the

(Setup) menu (page 12).

• This TV supports only the 480i signal format. If you connect the video equipment to the

TV through the VIDEO 2 IN jacks, check that the equipment is set to output 480i signals.

Troubleshooting

If, after reading the following instructions, you

have additional questions related to the use of

your Sony TV, please call one of the following

numbers.

Customers in the continental United States

contact the Direct Response Center at:

1-800-222-SONY (7669)

Customers in Canada contact the Customer

Relations Center at:

1-877-899-SONY (7669)

Trouble symptoms and remedies

Additional

Information

Self-diagnosis function

The TV is equipped with a self-diagnosis function. If

there is a problem with your TV, the STANDBY/

SLEEP indicator on the front panel will flash in

orange repeatedly. Writing down the duration of

flashes and interval between flashes helps you

inform qualified Sony personnel of the TV’s

condition.

1 Measure how long the STANDBY/SLEEP

indicator flashes and stops flashing.

For example, the indicator flashes for 2 seconds,

stops flashing for 1 second, and flashes for 2

seconds.

2 Press POWER on the TV to turn it off, and

disconnect the AC power adaptor and cord, then

inform qualified Sony personnel or the Direct

Response Center/Customer Relations Center of

how the indicator flashes (duration and interval).

STANDBY/SLEEP indicator

(flashing in orange)

(Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KLV155SR1 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info