Bedienungsanleitung Sony KLV23HR1 (Seite 51 von 56) (Englisch)

34054

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Additional Information

Problem Possible remedies

No picture.

Cannot receive any channels.

Cannot receive upper

channels (UHF) when using

an antenna.

TV is locked to one channel.

Cannot receive any channels

when using cable TV.

Cannot receive or select

channels.

The TV turns off

automatically.

(The TV enters the standby

mode.)

Troubleshooting

If, after reading the following instructions, you

have additional questions related to the use of

your Sony TV, please call one of the following

numbers.

Customers in the continental United States

contact the Direct Response Center at:

1-800-222-SONY (7669)

Customers in Canada contact the Customer

Relations Center at:

1-877-899-SONY (7669)

Trouble symptoms and remedies

Additional

Information

Self-diagnosis function

The TV is equipped with a self-diagnosis function. If

there is a problem with your TV, the STANDBY/

SLEEP indicator on the front panel will flash in

orange repeatedly. Writing down the duration of

flashes and interval between flashes helps you

inform qualified Sony personnel of the TV’s

condition.

1 Measure how long the STANDBY/SLEEP

indicator flashes and stops flashing.

For example, the indicator flashes for 2 seconds,

stops flashing for 1 second, and flashes for 2

seconds.

2 Press POWER on the TV to turn it off, and

disconnect the AC power adaptor and cord, then

inform qualified Sony personnel or the Direct

Response Center/Customer Relations Center of

how the indicator flashes (duration and interval).

STANDBY/SLEEP indicator

(flashing in orange)

• Make sure the power cord is connected securely.

• Turn on the power of the TV.

• Check antenna/cable connections.

• Check your HD Mode setting (page 8).

Select “HD Mode: 1080” when you receive a picture consisting of 1080 horizontal lines

with interlaced scanning, and select “HD Mode: 1035” when you receive a picture

consisting of 1035 horizontal lines with interlaced scanning.

For normal use of the TV, use “HD Mode: 1080” (factory setting).

• Set “Cable” to “Off” in the

(Channel) menu (page 20).

• Perform Auto Program to add receivable channels that are not presently in the TV’s

memory (page 20).

• Perform Auto Program to add receivable channels that are not presently in the TV’s

memory (page 20).

• Check your Channel Fix setting (page 21).

• Perform Auto Program to add receivable channels that are not presently in the TV’s

memory (page 20).

• Make sure “Cable” in the

(Channel) menu is set to “On” (page 20).

• Perform Auto Program to add receivable channels that are not presently in the TV’s

memory (page 20).

• This TV automatically changes to the standby mode after displaying the message “TV will

turn off soon” if it receives no broadcast or input signal through the connected equipment

for 10 minutes.

• Check that the Sleep timer is activated (page 50).

(Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KLV23HR1 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony KLV23HR1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info